6
english
Jabra CrUISEr
2 Set your Bluetooth phone to ‘discover’ the Jabra CRUISER
- Follow your phone’s instruction guide. First make sure that
bluetooth is activated on your mobile phone. Then set your
phone to discover the speakerphone. This usually involves
going to a ‘setup,’ ‘connect’ or ‘bluetooth’ menu on your phone
and selecting the option to ‘discover’ or ‘add’ a bluetooth device.*
3 Your phone will nd the Jabra CRUISER
- Your phone will find the speakerphone under the name
“Jabra CrUISEr”.
- Your phone then asks if you want to pair with the speakerphone.
accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with
the passkey or PIN = 0000 (4 zeros). Your phone will confirm
when pairing is complete.
CONNECTIVITY
SELECT
MobilSurf
BLUETOOTH
Infrared port
Wap options
Synchronization
Networks
DEVICES FOUND
Jabra CRUISER
Jabra CRUISER
OK
Passkey:
****
HANDSFREE
SELECT
Jabra CRUISER
added.
The handsfree is
now ready for use
SELECT
Manual pairing mode
If you wish to use the speakerphone with a dierent phone, or
if the pairing process was interrupted, you can manually set the
speakerphone to pairing mode.
Turn the speakerphone on. Press and hold the answer/end button
for approximately 5 seconds until “pairing mode” is announced.
Then repeat steps 2. and 3. in the above pairing guide.
ConneCtInG WItH YoUR PHone
Pairing is only needed the rst time a speakerphone and a phone
are used together. When the speakerphone and phone have
been paired once, they will automatically connect when the
speakerphone is on and bluetooth is activated on the phone. The
speakerphone can be used when it is “connected” to the phone.
If the devices are paired, but do not immediately connect, tap the
answer/end button.
* Phone dependent