SECTION 3: PREVENTATIVE MAINTENANCE

SECTION 3: PREVENTATIVE MAINTENANCE

PREVENTATIVE MAINTENANCE

Proper maintenance of your Jackson dishmachine will insure optimum service with a minimum of down time.

1.To delime the booster tank.

a.Remove the support pipe nut and lift the whole hood assembly away from the unit.

b.Loosen the fitting going into bottom side of booster tank.

c.Drain approximately 2 to 3 cups out of the tank.

d.Pour 1 to 2 cups of delimer into the hood support block opening, after tightening the booster tank union.

e.Replace the hood assembly.

f.Turn on the heat switch for 30 minutes.

g.Fill the machine with water.

h.Turn on manual wash switch and allow the unit to run for about 20 minutes.

i.Empty the machine and refill at least twice.

2.To remove all lime and corrosion deposits.

a.Fill the machine with wash water as would ordinarily be done for washing.

b.Open the door and place one cup or less of deliming compound into the water. (Be sure to follow their directions if they vary from these being given) which is available from your detergent supplier. Read and follow the label instructions.

c.Turn on the manual wash switch and allow to wash for five minutes.

d.Open the door and examine the interior. All lime should be removed and parts should be shiny. If not, allow to wash for a longer period.

e.After the interior is clean, empty the wash water be removing overflow strainer.

f.Replace the overflow strainer. Refill machine and allow to run for two minutes, then again drain the wash reservoir.

g.Refill as it is ready for regular operation.

3.Clean strainers.

a.Clean around overflow and pump intake strainer holes.

b.Clean around pump intake (a toothbrush makes a good cleaning tool).

4.Clean Y-strainer on the incoming water line. (Water to the machine must be turned off for this operation.)

a.Remove the plug and clean the strainer.

5.Clean rinse tubes.

a.Remove the end plugs on the lower and upper rinse arms.

b.Clean all rinse tubes with the special brush provided.

c.If spray holes in the rinse tubes are clogged, they may be cleaned with a pointed tool.

6.Clean the wash head assembly.

a.If the spray jets are plugged, use a pointed tool to dislodge and flush with water.

b.If lodged items still remain in the wash tubes, remove the wash assembly by first removing the rinse assembly.

c.Clean the assembly at the sink by flushing water through the spray jets.

d.Reinstall the wash and rinse assemblies.

7.Clean any deposits which may have built up on exterior moving parts.

15

Page 20
Image 20
Jackson 10APRB, 10AB, 10U operation manual Preventative Maintenance Preventative Maintenance

10U, 10AB, 10A, 10APRB specifications

The Jackson 10A, 10U, 10APRB, and 10AB series of dishmachines have made significant strides in commercial dishwashing technology. Designed for high efficiency and durability, these machines cater to various establishments, from restaurants to cafeterias, ensuring cleanliness and sanitation in a fast-paced environment.

The Jackson 10A model stands out for its advanced washing capabilities. Featuring a powerful pump and a unique wash arm design, it delivers an exceptional cleaning performance by ensuring thorough coverage of all dishware. This model is equipped with a high-temperature rinse option that sanitizes dishes effectively, meeting health department standards. Additionally, its energy-efficient heating elements contribute to reduced operational costs while maintaining optimal cleaning temperatures.

The Jackson 10U model is particularly notable for its user-friendly design and compact footprint. This makes it an ideal choice for smaller kitchens where space is at a premium. It boasts a high cycle speed, which allows for quick turnover of dirty dishes. The innovative control system lets operators easily set wash cycles and monitor machine performance, ensuring maximum efficiency and reducing water waste.

On the other hand, the Jackson 10APRB is engineered for versatility, capable of handling various types of dishware, including delicate glassware and sturdy pots. This model features adjustable shelves and a flexible design that accommodates different load sizes. The inclusion of an automatic chemical dispensing system ensures that the right amount of detergent is used, optimizing wash results while minimizing chemical costs.

The Jackson 10AB is designed for heavy-duty use, perfect for establishments with high dishwashing demands. This robust machine integrates a multi-stage filtration system to capture food particles and debris, prolonging the life of the appliance. Its high-speed wash cycles significantly enhance productivity, allowing for a steady stream of clean dishware with minimal downtime.

All models in the Jackson series are equipped with cutting-edge technology, including energy-efficient motors and low-water consumption features, making them environmentally friendly options for commercial kitchens. The advanced diagnostics and monitoring systems help operators troubleshoot any issues that arise, ensuring consistent operation and reducing maintenance time.

In conclusion, the Jackson 10A, 10U, 10APRB, and 10AB dishmachines exemplify innovation in commercial dishwashing technology. With features that emphasize efficiency, versatility, and durability, these machines are vital assets in any food service operation, delivering cleanliness and meeting rigorous health standards with ease.