Contents
February 24 P/N 7610-100-01-00 Revision E
An Company
10 SERIES, ELECTRICALLY HEATED, ROUND DISHMACHINES
FOR JACKSON MODELS 10A 10AB 10APRB 10U HIGHER HOOD OPTION
MANUFACTURERS WARRANTY
ONE YEAR LIMITED PARTS & LABOR WARRANTY
APPLICABLE
REVISION
REVISION
MADE
NOMENCLATURE FOR THE MODELS COVERED IN THIS MANUAL
Model Serial No Installation Date Service Rep. Name Phone No
10 SERIES
TABLE OF CONTENTS
SECTION SPECIFICATION INFORMATION
SECTION 1 SPECIFICATION INFORMATION 10 SERIES SPECIFICATIONS
FRONT VIEW
SECTION 1 SPECIFICATION INFORMATION 10A DIMENSIONS
TOP VIEW
LEFT VIEW
FRONT VIEW
SECTION 1 SPECIFICATION INFORMATION
10AB/10APRB/10U DIMENSIONS
TOP VIEW
SECTION 1 SPECIFICATION INFORMATION 10 SERIES TABLE DIMENSIONS
SECTION INSTALLATION/OPERATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
SECTION 2 INSTALLATION/OPERATION INSTRUCTIONS
LEVEL THE DISHMACHINE The dishmachine is designed to operate while being level. This is important to prevent any damage to the machine during operation and to ensure the best results when washing ware. The unit comes with adjustable bullet feet, which can be turned using a pair of channel locks or by hand if the unit can be raised safely. Ensure that the top of the tub is level from side to side and from front to back before making any con- nections
ALIGNING THE MACHINE Adjust the machine base to line up hole in table with hole in support block Fig
PLUMBING THE DISHMACHINE All plumbing connections must comply with all applicable local, state, and national plumb- ing codes. The plumber is responsible for ensuring that the incoming water line is thoroughly flushed prior to connecting it to any component of the dishmachine. It is necessary to remove all foreign debris from the water line that may potentially get trapped in the valves or cause an obstruction. Any valves that are fouled as a result of foreign matter left in the water line, and any expenses resulting from this fouling, are not the responsibility of the manufacturer
INSTALLATION INSTRUCTIONS
SECTION 2 INSTALLATION/OPERATION INSTRUCTIONS
PREPARATION
SECTION 2 INSTALLATION/OPERATION INSTRUCTIONS OPERATION INSTRUCTIONS
SECTION 2 INSTALLATION/OPERATION INSTRUCTIONS DETERGENT CONTROL
SECTION PREVENTATIVE MAINTENANCE
SECTION 3 PREVENTATIVE MAINTENANCE PREVENTATIVE MAINTENANCE
SECTION ELECTRICAL SCHEMATICS
3 PHASE
L2 L1
10A 208/220V 1 PHASE
10AB/10U 208/220V 1 PHASE
10A WIRING DIAGRAM 208-230 VOLT, 60HZ, SINGLE PHASE
SECTION 4 ELECTRICAL SCHEMATICS
10AB WIRING DIAGRAM 208-230 VOLT, 60HZ, SINGLE PHASE
SECTION 4 ELECTRICAL SCHEMATICS
9905-002-55-90a
SECTION 4 ELECTRICAL SCHEMATICS
10AB WIRING DIAGRAM 208-230 VOLT, 60HZ, THREE PHASE
9905-002-55-91a
SECTION 4 ELECTRICAL SCHEMATICS
10APRB WIRING DIAGRAM 208-230 VOLT, 60HZ, SINGLE PHASE
9905-002-55-92a
SECTION 4 ELECTRICAL SCHEMATICS
10APRB WIRING DIAGRAM 208-230 VOLT, 60HZ, THREE PHASE
SECTION JACKSON MAINTENANCE REPAIR CENTERS
SECTION 5 JACKSON MAINTENANCE & REPAIR CENTERS
BANA PARTS INC. 1501 KUEBLE STREET HARAHAN, LA
GCS SERVICE INC. 1002 NANDINO BLVD. LEXINGTON, KY
EMR SERVICE DIVISION 700 EAST 25TH STREET BALTIMORE, MD
EMR SERVICE DIVISION 2626 PITTMAN DRIVE SILVER SPRING, MD
800 532-6127 FAX
HAWKINS COMMERCIAL APPLI
1900 COLLEGE AVENUE ELMIRA HEIGHTS, NY
200 SALINA ST. SUITE 114 LIVERPOOL, NY
ELMER SCHULTZ SVC. 540 NORTH 3RD STREET PHILADELPHIA, PA
NORTHERN PARTS & SVC. 4874 S. CATHERINE STREET PLATTSBURGH, NY
CANADA
GCS/STOVE PARTS 2120 SOLANA STREET FORT WORTH, TX
