Jacuzzi BY82000 Air Jet Controller, Increase, Decrease, Temperature, Air Flow Led, Air Tower

OPERATION

AIR TOWER

Air Jet (12)

Controller

AIR TOWER CONTROLS

ON/OFF	INCREASE	DECREASE
BUTTON	TEMPERATURE	TEMPERATURE
	AIR FLOW LED

AIR TEMPERATURE LED AIR TEMPERATURE AIR FLOW

CONTROLLER

To turn ON press ON/OFF button or turn ON water at either shower tower. The unit will then automatically go into a preheat cycle to heat the air transmission pipes. There will be a 5 (five) minute pause while the system preheats. During this time both LEDs will be ON. When ready for drying, press the ON/OFF button. Heat and air flow will rise together (only at initial start-up). After reaching the desired flow, the temperature may be de- creased or increased using the Temperature button. The air flow may also be adjusted.

Note: Temperature and air flow are factory set with a predetermined heat and air speed.

17

Jacuzzi Whirlpool Bath© BY82000 03/05