FIXED PANEL TO BOTTOM RAIL
FIXED PANEL
TWO
SCREWS
R
| LAY A 1/4" BEAD OF | |
BOTTOM RAIL | SEALANT UNDER THE | |
FIXED PANEL | ||
|
R | SCREW | M4.2X19MM | |
STAINLESS STEEL | |||
| |||
|
|
DRILLING FIXED PANEL
IMPORTANT:
MUST DRILL AT A 15°
ANGLE TO AVOID | 1/8" |
DRILLING THROUGH SIDE OF RAIL.
15°
|
|
|
| E |
|
|
| D | |
|
|
| I |
|
|
| S |
| |
| T |
|
| |
U |
|
|
| |
O |
|
|
|
|
ILLUSTRATION 12
DRILLING FIXED PANEL
IMPORTANT:
MUST DRILL AT A 15°
ANGLE TO AVOID
DRILLING THROUGH
DOOR GUIDE AREA.
S
15°
DOOR GUIDE
AREA
ILLUSTRATION 14
ILLUSTRATION 13
S SCREW | M3.5X9.5MM |
STAINLESS STEEL |
10.Locate the bottom rail and the fixed panel. Lay a bead of sealant on the bottom of the fixed panel. Secure the bottom rail to the fixed panel. (See
Illustration 12.) Drill a 3/32" diameter hole into the bottom rail at a 15° angle. Drill only through the first aluminum thickness. (See Illustration 13.) Secure the front of the fixed panel to the bottom rail. (See Illustration 14.) Clean off excess sealant.
13