Back Wall
Use cable ties to attach the CD/Radio wire bundle to the cascade hose. The hoses from valves 1 and 3 and the steam hose are loosely attached to their mounting brackets to allow the slack when connecting them and when the hinged seat wall is swung open (like a door) to access equipment. After they have been connected and there is sufficient slack, the cable ties may be tightened. Feed the hot and cold water, valve manifold supply, valve 6 and 7 lines from the equipment side wall and connect as below. Route the water filter line and control cable to the equipment side wall.
To Cascade Tee
Control Cable
To Valve 1
To Valve 3 
To Valve 6
To Valve 7
From Water Filters
Cold Water Supply (with braided metal sheathing)
Hot Water Supply (with braided metal sheathing)
To Manifold
Steam Line (with black insulation cover)
CD/Radio Speaker and Power Wires
To Cascade Fitting
To Jets
To Steam Head
20
