J-Dream II Owner's Manual
Drain Fitting (provided with unit)
Leave enough flexibility in the waste line to allow the end of the stub-out to be blocked temporarily in a position under flush with the floor surface. This will allow the shower unit to slide across the floor into position without having to lift the shower unit.
Studwall
Temporary
Wood Block Drain
Compression
Fitting
Remove the block and pull the drain assembly up to insert the stub into the drain. The drain fitting is a non-caulk type (compression fitting) drain. Make certain that the locking ring is loose to allow the drain stub to insert easily inside the rubber compression sleeve. If necessary, lubricate the sleeve with a mild soap solution. The drain stub must extend well into the rubber sleeve before the locking ring is tightened. Use a screwdriver and the assembly tool provided to tighten the locking ring.
Screwdriver
Tighten
Locking Ring
Clockwise
Broken Line | Rubber |
Represents |
Drain Stub | Compression |
| Sleeve |