Jacuzzi J-SHOWER TOWERTM manual Contents, Tools Required

Important

The bathtub must be installed per installation instructions D884000 for the Merano™ or E160000 for the Siena™. Follow the instructions to ensure that proper framing has been provided to support the J-Shower Tower. Finishing materials must be waterproof and sealed so that spray and condensation do not cause moisture damage.

NOTE: The J-Shower Tower has been partially pre-assembled for your convenience during installation. The installer must still follow the instructions to ensure proper installation of the tower and components (see page 13). We recommend that two persons perform this installation.

Contents

Exploded View of J-Shower Tower ________________________________________________________	2
Shower Tower Hardware Identification Chart __________________________________________________	4
Tower Assembly _______________________________________________________________________	7
Water Lines to Mixer/Diverter Valve _________________________________________________________	10
Attaching Diverter Valve to Shower Wall _____________________________________________________	10
Tower Installation ______________________________________________________________________	12
Tower Disassembly ______________________________________________________________________	13
Placing Tower __________________________________________________________________________	14
Fixed Panel Assembly ____________________________________________________________________	15
Mounting Top Ring and Wall Bracket to Tower _________________________________________________	17
Fixed Glass Frame Attachment _____________________________________________________________	19
Sealing and Trimming ____________________________________________________________________	20
Attaching Face Plate _____________________________________________________________________	21
Handle Installation _______________________________________________________________________	21
Handle Operation _______________________________________________________________________	22

Tools Required

1.Drill.

2.Drill bits: 3/32", 1/8", 3/16" and 5/16".

3.Flat blade screw driver, No. 1.

4.Phillips type blade screw driver, No. 2.

5.5/16" or 8 mm deep socket or nut driver.

6.Caulking gun.

7.Sealant (100% silicone).

8.Adjustable wrenches (small and medium).

9.Allen wrenches: 1.5 mm, 2.5 mm, 3 mm and 5/64".

10.Step ladder.

1