Jacuzzi J-SHOWER TOWERTM manual Screw, Illustration Located In Hardware Kit, H9 SCREW

FIXED PANEL TO BOTTOM RAIL LOCATED IN HARDWARE KIT

FIXED PANEL

TWO

SCREWS

H8

	LAY A 1/4" BEAD OF
BOTTOM RAIL	SEALANT UNDER THE
	FIXED PANEL

H8	SCREW	M4.2X19MM
		STAINLESS STEEL
	QTY.-2

DRILLING FIXED PANEL

IMPORTANT:

MUST DRILL AT 15°

ANGLE TO AVOID 1/8"

DRILLING THROUGH SIDE OF RAIL.

15°

ILLUSTRATION 12

DRILLING FIXED PANEL

IMPORTANT:

MUST DRILL AT 15°

ANGLE TO AVOID

DRILLING THROUGH

DOOR GUIDE AREA.

H9

15°

DOOR GUIDE

AREA

ILLUSTRATION 14

ILLUSTRATION 13

LOCATED IN HARDWARE KIT

H9 SCREW	M3.5X9.5MM
	STAINLESS STEEL
QTY.-1

7.Locate the bottom rail and the fixed panel. Lay a bead of sealant on the bottom of the fixed panel. Secure the

bottom rail to the fixed panel. (See Illustration 12.) Drill a 3/32" diameter hole into the bottom rail at about 15° . Drill only through the first aluminum thickness. (See Illustration 13.) Secure the front of the fixed panel to the bottom rail. (See Illustration 14.) Clean off excess sealant.

15