INSTALLATION

Framing and Support

The optional drain/overflow of the bath extends below the bottom of the bath. Note that this requires a cutout in the floor.

The floor structure beneath the bath must be able to support a total weight of bath, water, and bather. Refer to the table under total weight for your model. The unit must be supported from the bottom of the bath and not from the bath rim or nailing flange. If the subfloor is level and a continuous surface, no other preparation is necessary. You can proceed to install the bath. If the subfloor is not level, you MUST level the entire surface prior to installing the bath. The use of materials that shim or provide a level installation are allowed provided the method used will insure a level bath that is supported from the bottom. Materials that may be used are a floor leveling compound, mortar, plaster or minimal expansion structural foam; however the bath must remain level in order for it to drain properly and all foam feet must make full contact with the leveling material. Both sides of a joint or splice of subfloor should be level to each other.

The rim of the bath is not designed to support weight. If finish material is to overlap or contact the bath, the added weight must be fully self-supporting.

Install optional trim parts when all installation has been completed.

ANCHOR STRAP

Drop-In Bath units are equipped with metal anchor straps. These straps can be used to secure the unit to the floor or sub- floor to reduce movement after installation. If mortar or similar anchoring material is used, these straps are not necessary.

WARNING: ALL foam feet must contact the floor. Anchoring straps and/or other anchoring materials will not properly anchor unit if ALL foam feet are NOT in contact with a level floor. Operating a unit improperly installed may cause irreparable damage to the unit.

Service Access

For partially or fully sunken installations, allow for access to service connections. It is the installer’s responsibility to provide sufficient service access. The recommended minimum dimensions allowable for service to the bath are shown in the “Service Access” illustration below.

Provide adequate ventilation for cooling and to supply sufficient air for the blower. Do not insulate this area or around blower or motor.

TYPICAL INSTALLATION (Semi-Sunken)

Tile

Mortar or adhesive

Sealant

Flashing

Sub-floor

1 x 4 inch

(Not for support

ANCHOR STRAP

Nail or screw through anchor strap into floor

Anchor strap

Floor

SERVICE ACCESS REQUIRED

Blower

12”

FRONT

18”

12”

PREFERRED

18” ALTERNATE ACCESS ACCESS

ENGLISH

Jacuzzi© Whirlpool Bath: Installation and Operation

Page 10

BE76000F • December 2007

Page 10
Image 10
Jacuzzi LUXURY SERIES manual Installation, Framing and Support, Service Access

LUXURY SERIES specifications

The Jacuzzi Luxury Series epitomizes the pinnacle of modern hydrotherapy. Designed with a commitment to quality and elegance, this series offers an unparalleled experience for relaxation and wellness. Combining advanced technology, superior craftsmanship, and striking aesthetics, the Jacuzzi Luxury Series stands out in the crowded marketplace of hot tubs and spas.

One of the main features of the Luxury Series is its innovative hydrotherapy system. Incorporating strategically placed jets that can be customized to deliver a massage tailored to individual preferences, this system is designed to target key muscle groups. The variety of jet types, including pulsating motion for deep tissue relief and gentle streams for relaxation, ensures that users can enjoy a spa experience that caters to their specific needs. The incorporation of dual-zone temperature controls allows different areas of the spa to maintain varying temperatures, catering to multiple users at once.

The Luxury Series also boasts advanced water management technologies. With an integrated filtration system, users enjoy crystal-clear water with minimal maintenance. The patented CLEARRAY water management system employs UV-C light to neutralize harmful contaminants, ensuring that the water is not only clean but also environmentally friendly. The automatic drainage and water renewal feature enhances usability, allowing for easy upkeep without interrupting relaxation time.

In terms of aesthetics, the Luxury Series does not compromise on style. Available in a variety of sizes and finishes, these hot tubs can complement any outdoor living space. The premium material used in the construction, along with seamless cabinetry and LED lighting options, provides both durability and visual appeal. The addition of ergonomic seating ensures maximum comfort for users, as every detail has been meticulously planned.

Innovative technology extends to the user experience as well. The integration of smart controls allows users to adjust temperatures, jets, and lighting through a mobile app, making it incredibly convenient to operate even when away from the spa. This connectivity reinforces the idea that relaxation can be seamlessly integrated into modern living.

In conclusion, the Jacuzzi Luxury Series embodies a blend of sophisticated design, cutting-edge technology, and therapeutic benefits. With features that prioritize user comfort and wellness, it has become the gold standard for those seeking a luxurious spa experience. Whether for relaxation after a long day or therapeutic relief after physical exertion, the Luxury Series offers a sanctuary tailored to the needs of its users, making it an essential addition to any home.