SPECIFICATIONS
Important: Read complete instructions before beginning installation.
Each bath arrives ready for installation, completely equipped with blower motor and plumbing necessary for operation. A drain/overflow kit is included for installation on the bath.
Remove the bath from the carton. Retain the shipping carton until satisfactory inspection of the product has been made. Do not lift the bath by the plumbing at any time; handle by the shell only.
Immediately upon receipt, inspect the shell before installing. Should inspection reveal any damage or defect in the finish, do not install the bath. Damage or defect to the finish claimed after the bath is installed is excluded from the warranty. Jacuzzi© Whirlpool Bath’s responsibility for shipping damage ceases upon delivery of the products in good order to the carrier.
Refer any claims for damage to the carrier. For definitions of warranty coverage and limitations, refer to the published warranty information packed with the product. All bath units are factory tested for proper operation and watertight connections prior to shipping.
NOTE: Prior to installation, the bath must be filled with water and operated to check for leaks that may have resulted from shipping damage or mishandling. Jacuzzi© Whirlpool Bath is not responsible for any defect that could have been discovered, repaired, or avoided by following this inspection and testing procedure.
ENGLISH
Rectangular Baths
|
| L |
|
|
|
|
| W |
|
|
|
|
|
|
|
| 2” |
|
| 4” | H | Blower |
| A |
|
| |||
|
|
|
|
|
|
|
|
|
| |||||
|
| (51 mm) |
|
| (102 mm) |
|
|
|
|
|
| |||
|
| SIDE VIEW |
|
|
| END VIEW |
|
| B |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
| Allusion |
|
|
| Drain/Overflow |
|
| ||||
|
| L |
|
|
|
|
| W |
|
|
|
|
|
|
|
|
|
|
| 2” | H | Blower |
|
|
|
|
|
| |
|
|
|
|
| (51 mm) |
|
|
|
|
|
|
|
|
|
|
| SIDE VIEW |
|
|
| END VIEW |
|
|
|
|
|
| ||
|
|
| Bellavista 5.5 and 6 |
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
MODEL |
| DIMENSIONS |
| DRAIN/OVERFLOW |
|
| CUTOUT | TOTAL WEIGHT/ |
| OPERATING |
| PRODUCT | SKIRT AND | |
|
|
|
|
|
|
|
|
| FLOOR LOADING |
| GALLONS |
| WEIGHT | MOUNTING |
ALLUSION 6636 | 66" | (1829 mm) L |
| (441 mm) A |
|
| Template Provided | 868 lb (395 kg)/ |
| 58 U.S. gal |
| 135 lb | Not | |
800W | 36" | ( 914 mm) W |
| (210 mm) B |
|
| P/N BY20000 | 53 lb/ft2 (259 kg/m2) |
| (220 liters) |
| (61 kg) | available | |
| 26" | ( 660 mm) H |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Allusion 7236 | 72" | (1829 mm) L |
| (441 mm) A |
|
| Template Provided | 945 lb (430 kg)/ |
| 66 U.S. gal |
| 145 lb | Not | |
800W | 36" | ( 914 mm) W |
| (210 mm) B |
|
| P/N BY20000 | 53 lb/ft2 (259 kg/m2) |
| (250 liters) |
| (66 kg) | available | |
| 26" | ( 660 mm) H |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Allusion 7242 | 72" | (1829 mm) L |
| (441 mm) A |
|
| Template Provided | 1170 lb (532 kg)/ |
|
| 155 lb | Not | ||
800W | 42" | (1067 mm) W |
| (210 mm) B |
|
| P/N BY20000 | 56 lb/ft2 (273 kg/m2) |
| (277 to 356 liters) |
| (70 kg) | available | |
| 26" | ( 660 mm) H |
|
|
|
|
|
|
|
|
|
|
|
|
BELLAVISTA 5.5' | 66" | (1676 mm) L |
| 20" | (508 mm) A |
|
| Template Provided | 1078 lb (490 kg)/ |
| 85 U.S. gal |
| 120 lb | Not |
800W | 42" | (1067 mm) W |
| (298 mm) B |
|
| P/N P187000 | 56 lb/ft2 (273 kg/m2) |
| (322 liters) |
| (56 kg) | available | |
| 26" | ( 660 mm) H |
|
|
|
|
|
|
|
|
|
|
|
|
BELLAVISTA 6' | 72" | (1829 mm) L |
| 20" | (508 mm) A |
|
| Template Provided | 1180 lb (535 kg)/ |
| 90 U.S. gal |
| 130 lb | Not |
800W | 42" | (1067 mm) W |
| (298 mm) B |
|
| P/N P187000 | 56.2 lb/ft2 (274.4 kg/m2) |
| (341 liters) |
| (59 kg) | available | |
| 26" | ( 660 mm) H |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: The overall dimensions are nominal with a tolerance of +0 and
ELECTRICAL SERVICE REQUIREMENTS: 115 VAC, 15 AMP, 60 Hz.
Requires dedicated separate GFCI protected circuit.
Gallons given are in U.S. gallons.
Jacuzzi© Whirlpool Bath: Installation and Operation | Page | BE76000F • December 2007 |