Relocating the Blower Motor

ELECTRICAL CONNECTION

Route electrical connection from pump to control box and from control box to duplex receptacle

3-Prong plug from control box

The 800W units come with a fused control box. For convenience and/or accessibility, the blower motor (and fused control box on 800W units) can be installed in a remote location.

IMPORTANT: Normally the Ozone equipment is connected to the Blower equipment. Because the Ozone equipment should be kept with the air bath, you need to provide a dedicated GFCI at 15 A for the Ozone equipment.

NOTE: The blower motor (and fused control box on 800W units) must be relocated as a unit.

ENGLISH

Duplex receptacle (Not provided)

FLOOR

4” *

A separate circuit, which must be protected by a Ground Fault Circuit Interrupter (GFCI), is required in the remote location. Electrical connections should be performed by a licensed electrician. The remote location must be service accessible. The total length of the air pipe must not require more than 15’ (4.57 m) of piping and 6 directional changes. Pipe diameter must be 1-1/2” (38 mm) or larger. Choose a space as close

*4 inch minimum (or in accordance with local building or electrical codes

Electrical Connections

A separate circuit, which must be protected by a Ground Fault Circuit Interrupter (GFCI), is required. Install a duplex outlet to the studwall underneath the bathtub, at least 4 inches (102

mm)above the floor or according to local building and electrical codes. The duplex outlet is not provided.

Danger: Risk of electric shock. Connect only to a circuit protected by a Ground Fault Circuit Interrupter.

to the bath as possible so the system works as efficiently as possible. This space must be at least 30 cubic feet (2.79 m2) and the blower must be mounted at least 2” (50.8 mm) above the floor and 2” (50.8 mm) minimum away from any wall. The blower must not be installed in an attic area.

NOTE: Do not remove the inverted U and check valve, see figures below. Do not glue piping to the blower. Blower is attached to the piping via a screw. Glue the air pipe and let set overnight before attaching the blower with screw.

NOTE: Installing the Blower in a remote location will reduce system efficiency.

CAUTION: It is imperative to let the glued blower air pipe set overnight as there may be fumes from the glue that could be ignited if not allowed to dissipate.

Provide adequate ventilation in the remote location for cooling the motor and to supply sufficient air for the blower. The intake of the blower must not be blocked, restricted or have any debris around it that can potentially be sucked into blower. Insulation on the air pipe length can reduce heat loss.

NOTE: Relocated blower requires a service access for the control box and blower.

REMOTE LOCATION IN ADJACENT SPACE

REMOTE LOCATION UNDER FLOOR

Do not remove inverted “U”

Adjacent space

Connect only to a GFCI protected circuit

Control cable

Do not removeto blower inverted “U”

FLOOR

Control line

Check valves

(2)

Screw

Check

valves (2)

FLOW

FLOW Screw

Connect only to a GFCI protected circuit

Control cable to blower

Page 11

BE76000F • December 2007

LUXURY SERIES specifications

The Jacuzzi Luxury Series epitomizes the pinnacle of modern hydrotherapy. Designed with a commitment to quality and elegance, this series offers an unparalleled experience for relaxation and wellness. Combining advanced technology, superior craftsmanship, and striking aesthetics, the Jacuzzi Luxury Series stands out in the crowded marketplace of hot tubs and spas.

One of the main features of the Luxury Series is its innovative hydrotherapy system. Incorporating strategically placed jets that can be customized to deliver a massage tailored to individual preferences, this system is designed to target key muscle groups. The variety of jet types, including pulsating motion for deep tissue relief and gentle streams for relaxation, ensures that users can enjoy a spa experience that caters to their specific needs. The incorporation of dual-zone temperature controls allows different areas of the spa to maintain varying temperatures, catering to multiple users at once.

The Luxury Series also boasts advanced water management technologies. With an integrated filtration system, users enjoy crystal-clear water with minimal maintenance. The patented CLEARRAY water management system employs UV-C light to neutralize harmful contaminants, ensuring that the water is not only clean but also environmentally friendly. The automatic drainage and water renewal feature enhances usability, allowing for easy upkeep without interrupting relaxation time.

In terms of aesthetics, the Luxury Series does not compromise on style. Available in a variety of sizes and finishes, these hot tubs can complement any outdoor living space. The premium material used in the construction, along with seamless cabinetry and LED lighting options, provides both durability and visual appeal. The addition of ergonomic seating ensures maximum comfort for users, as every detail has been meticulously planned.

Innovative technology extends to the user experience as well. The integration of smart controls allows users to adjust temperatures, jets, and lighting through a mobile app, making it incredibly convenient to operate even when away from the spa. This connectivity reinforces the idea that relaxation can be seamlessly integrated into modern living.

In conclusion, the Jacuzzi Luxury Series embodies a blend of sophisticated design, cutting-edge technology, and therapeutic benefits. With features that prioritize user comfort and wellness, it has become the gold standard for those seeking a luxurious spa experience. Whether for relaxation after a long day or therapeutic relief after physical exertion, the Luxury Series offers a sanctuary tailored to the needs of its users, making it an essential addition to any home.

Jacuzzi LUXURY SERIES manual Relocating the Blower Motor, Electrical Connections

Models: LUXURY SERIES

ELECTRICAL CONNECTION