OPERATION

ENGLISH

RapidHeatTM Operation

Once the heater is installed and the whirlpool pump is operating, the heating function is totally automatic. The heater will help maintain the temperature of the water in the bath.

Vacuum Switch

The heater is equipped with a preset vacuum switch which will not allow the heater to turn ON if the pump is not running with water flowing through the whirlpool sys- tem.

High-Limit Switch

The heater includes an exclusive High-Limit switch. This safety circuit will not false trip from hot tap water. It will only turn off the heater if the thermostat fails. To reset, press the button. If the high-limit trips frequently, contact your Authorized Electrical/Mechanical Service Provider. Visit our web site at http://www.jacuzzi.com/ to find a Service Provider.

Heater On Indicator

The light will be illuminated any time the heater is operating.

HIGH LIMIT RESET

HEATER ON

OVER HEAT

HEATER ON

 

PROTECTION

 

PUSH TO RESET

 

Controlling Whirlpool Action

The whirlpool action in your bath is influenced by three factors – direction of flow, force of water, and force of air. All baths manufactured by Jacuzzi Whirlpool Bath are equipped with fully adjustable PowerPro® jets, which are adjustable for all three factors. Some baths have additional directionally adjustable jets which can be adjusted for direction and flow of air only.

Direction: To change the direction of the water flow, swivel the jet nozzle to the desired angle. The jets can be directed individually toward any location on your body to provide a hydromassage. The jets can also be adjusted so that they all point in the same direction (clock- wise or counterclockwise) to circulate the water in a circular motion around the bath, causing a total whirlpool effect.

Water Force: The high volume, fully adjustable jets can be adjusted to control the force of the water coming into the bath. For robust action, increase the force of the flow by rotating the jet handles to the left (counter- clockwise). For a more gentle effect, rotate the handles to the right (clockwise). Never run the whirlpool system with all the jets closed.

Force of Air: Two knobs located on the bath serve as controls for the air induction system. The intensity of the hydromassage whirlpool action is determined by the amount of air inducted into the water. As the amount of air is increased, the hydromassage action increases. For maximum air induction, rotate the control knobs fully counterclockwise to the largest circles. For fewer air bubbles, decrease the amount of air induction by rotating the control knob clockwise. When the knobs are turned to the smallest circles, only water is being circulated.

JETS

DIRECTIONALLY

FULLY

ADJUSTABLE

ADJUSTABLE

Back Massage Jet - Flow Adjustment

AIR INDUCTION CONTROLS

TURN CLOCKWISE TO

TURN COUNTER-CLOCKWISE

Close

REDUCE AIR FLOW

TO INCREASE AIR FLOW

 

Open

10

Jacuzzi Whirlpool Bath© U961000G 2/05