JAI CV-M10 Pin Assignment, Pin Multi-connector DC-IN/SYNC, Pin Multi-connector RS 232C/TRIGGER

CV-M10BX/CV-M10RS

5. Pin Assignment

5-1. 12-pin Multi-connector (DC-IN/SYNC.)

Type: HR10A2-10R1-102PB9-018(Hirose) male seen from rear.

341151267

￿Pin128964235710no￿￿.￿ HDV+12Video+12npuSignalVDCGNDGNDDC21t/ououtputinputinput￿￿￿ParallelExtVideo.VDHD2inwithonlyinasthefactory2:1BNCinterlacesttingvideo.1..*1)Pixeloutput*2)clock.RemarksAvoidoutputdouble.Opttermination.*1) .

Notes: *1) Signals on pin no. 6, 7 and 9 can be changed by jumper setting.
See "8. Jumper Settings" for more information.				TXDSignalRXDoutin￿￿￿	NConBXversionRemarks
Type: HR10A-7R-6PB (Hirose) male seen fromPinrear.21no.￿
*2) In Edge Pre-select and Pulse Width Control mode do not input ext. VD signal.
213	465	￿	6435￿	Ext.WENTrigGNDNCoutputinput￿	*Note
5.2. 6-pin Multi-connector (RS 232C/TRIGGER)

Note: WEN is generated in Normal Trig, Random Trig (normal and high speed shutter) and Low Speed Shutter. It is 1 H long and indicates the beginning of video read out.

- 3 -