JAI CV-M10 operation manual Mode Settings, Mode Setting by Switch

CV-M10BX/CV-M10RS

7. Mode Settings

7.1. Mode Setting by Switch

The mode setting switch SW1 on rear for CV-M10BX and CV-M10RS is different for switch SW1-1 to SW1-3 and SW1-7 to SW1-

8.For BX the shutter values can be selected in 3 ranges depending of the internal SW1 on the PK 8206 board. The switch select between Normal, High speed or Low speed. In the following the switch settings are shown.

7.1.1. M10BX Internal Switch SW1 Settings (On PK8206)				Shutteroff
<
					Flickeress
ON					Normalshutter
<
					High
<<> Lowspeedshutter Lowspeed
3 2
4 1
OFF <
><
<>
>
	<			0001/08 shutterNormal
	OFF1		ON <><>					<>		Highshutterspeed
6 4 2 8 6 4 2
7.1.2. M10BX Switch SW1 Settings (On rear panel)		0
				000001
4 2 100000 8 6 4 2										shutter
SHUTTER		2			<><><			><	>
		3
		4			Randomtrig				Normal
TRIGGER		5						<>
SCANNINGMMA		6				Interl1.			0.45nInterl.
GAIN	1 4 250 1 1
		8		<		><	<>
				<
	60 1/
		7

FixedRearpotm.AGC<>
7.1.3. M10RS Switch SW1 SettingsSCANNINGSHUTTERTRIGGER(On rear panel)OFF<12345		ON10000<Rando<>><Interlm<>trig><.>><N>ormalnInterlshutterNormal.
4125250
60 1/
GAMMA	6	<	1	0.45
RS232	87		Switchonrear	RS232C

Note: The shown switch settings are the factory setting. Values are shown for EIA.

- 8 -