CV-M2
- 24 -
6.4.7. Sensor Gate Control
This function is for applications with strobe flash illuminations or long time accumulations up to
several frames. The resulting video is then read out after the first FVAL (or SG), following the
trailing edge of the Sensor Gate Control signal.
The sensor gate control signal can be synchronized by the FVAL signal. Fig. 29A. and fig. 29B.
shows the minimum sensor gate signal width if it is synchronized to FVAL.
To use this mode:
Set function: Trigger mode “Normal” TR=0
Sensor gate control SG=1
LVAL synchronous accumulation LS=1
Scanning format SC=0 through SC=4
Output select OS=0, OS=1
Polarity and other functions
Input: Sensor gate control to Camera Link or pin 10 on 12-pin connector.
Important notes on using this mode.
LVAL
DATA OUT
SUB
SG
FVAL
SG disabl e
EEN
Exposure
Per i o d
Sensor Gate
Con t ro l
Signal
always Low
always Hi gh
No Dat a
Fig. 29. Sensor Gate Control
FVAL
SG
514ck
444ck
LVAL
78ck
(1.95us)
Sensor Gate
Contr ol Si gnal
608ck
1282ck (1ck=25ns)
82ck
(2.05us)
(15. 2us)
(32. 05us)
Fig. 29A. Sensor Gate Control single channel details
FVAL
SG
514ck
LVAL
80ck
(2us)
Sensor Gate
Contr ol Si gnal
190ck
864ck (1ck=25ns)
32ck
80ck
(2us)
(4.75us)
(21. 6us)
Fig. 29B. Sensor Gate Control dual channel details