JAI CV-M30 operation manual Pin Assignment, Pin Multi-connector DC-IN/VIDEO OUT, EXT.HD/VD

CV-M30

5. Pin Assignment

5.1.12-pin Multi-connector (DC-IN/VIDEO OUT, EXT.HD/VD IN)

Type: HR10A-10R-12PB-01 (Hirose) male Seen from rear.

1 9

2 10 8

3 11 12 7

4 6

5

Fig. 2. 12 pin connector

Pin no	Signal	Remarks
1	GND
2	+12 V DC input
3	GND
4	Video output	Parallel with the BNC connector. *1)
5	GND
6	HD input
7	VD/trig input	Parallel with pin 5 on 6 pin con. *2)
8	GND
9	EEN output	Parallel with pin 2 on 6 pin con.
10	GND
11	+12 V DC input
12	GND

Notes:

*1) The video signal on pin 4 is in parallel with the BNC connector. Avoid double termination

*2) If external trigger pulse is input on either No.7 of 12 pin connector or No. 5 of 6 pin connector, no external VD signal should be input on the other.

5.2.6-pin Multi-connector (TRIGGER)

Type: HR10A-7R-6PB (Hirose) male Seen from rear.

		Pin no.	Signal	Remarks
		1	RM1	Normal/Double speed. (SW1-5)
1	6	2	EEN Output	Parallel with pin 9 on 12 pin con.
2	5	3	GND
3	4	4	NC
		5	VD/trig input	Parallel with pin 7 on 12 pin con. *2)
		6	WEN output

Fig. 3. 6 pin connector

- 4 -