JAI CV-M30 operation manual Locations and Functions

CV-M30

4. Locations and Functions

Fig. 1. Locations

1.1/2” interline-transfer type CCD sensor

2.Lens mount for C-mount lenses. *1)

3.BNC connector for video output

4.Switch block SW1 for shutter speed and function mode setting

5.6-Pin connector for Input/output of control signals

6.12-Pin connector for 12V DC power and external sync signals

7.Gain potentiometer for manual gain adjustment

8.Screw holes for Tripod mount plate. (Screws 3.0 x 5mm)

9.Tripod mount plate to place the camera on a tripod

Note *1):	Rear protrusion on the C-mount lens must be less than 10mm (0.4 inches approx.).
	When IR-cut filter is used, it must be less than 7.0 mm (0.28 inches approx.).
	The IR-cut filter is placed in the C-mount thread.
	The C-mount IR-cut filter must be ordered separately.

- 3 -