EN Camera Series

on the output from the light sensor. The user can manually turn on and off the strobe and night light if necessary. You need to be able to access the following registers by means of the EN setup software.

Register Address 10: Night Light Control

Register Address 11: Night Light ON threshold and Flash enable. Register Address 12: Night Light OFF

threshold and Flash enable. Register Address 50: Camera ADR Control

The distance and angle of the strobe unit toward the target is critical and must be optimized. Please refer to the VIS400 Installation Manual for more information.

6.5External Control

6.5.1RS-485

The EN Camera has the ability to connect multiple cameras on the same RS-485 network. Each camera has an individual ID number selectable via control registers; Camera RS-485 group register (address=107) and Camera RS-485 address registers (address=109). Thus it is possible to send a serial RS-485 trigger to any or all of the cameras. RS-485 communication is accessed via the 26-pin connector on the rear panel of the camera.

RS-485 is typically used by the lane controller to send serial trigger or to send DatalD message to validate the HW TTL trigger.

RS-485 is a differential signal communication for longer distance. Since RS-485 is not a common port for PCs, a plug-in 485 board such as ULTRA-485 (Industrial Computer Source, San Diego, CA, 800- 523-2320) or compatible is required.

6.5.2Ethernet

The primary benefit of Ethernet is the scalability of the system; you can add as many EN cameras as you want to the system. For example, you can connect up to 255 Ethernet devices to one class A subnet. Command/Status register access and image transfer are securely done over TCP/IP protocol. In addition to the message-based TCP image transfer, sniffing image on UDP is also supported. Captured images are buffered inside EN camera, and can be automatically transferred to FTP server. Ethernet trigger can be used for applications where time critical response is not required as hardware TTL trigger.

All functions over Ethernet are accessible by EN setup software. Please refer to VIS300/400EN Setup User's Guide (Doc Number 4087-72-005).

6.6Color Filter Array (Color Version)

The color filter array requires software to interpolate color. If the proper interpolation software is not present the camera provides an 8-bit monochrome image. The necessary DLL is available from JAI Inc.. The JAI Inc. EN Camera cameras use the Bayer color mosaic filter pattern (see Figure 16 below). The CFA contains 50% green photo sites and 25% red and 25% blue photo sites.

 

 

 

48

Camera Features

Page 47 Page 49
Page 48
Image 48
JAI TS(C)-2076EN, TS(C)-1327EN, TS(C)-2030EN manual External Control, Color Filter Array Color Version, 1 RS-485, Ethernet
Page 47 Page 49

TS(C)-1327EN, TS(C)-4032EN, TS(C)-2030EN, TS(C)-2076EN specifications

The JAI TS(C) series features a range of advanced cameras designed to meet the diverse needs of industrial imaging applications. Among the models in this series, the TS(C)-2076EN, TS(C)-2030EN, TS(C)-4032EN, and TS(C)-1327EN stand out for their innovative technologies and robust characteristics.

The TS(C)-2076EN is equipped with a 20 megapixel sensor that delivers high-resolution images with exceptional clarity. Utilized primarily in high-performance machines, its compact design ensures easy integration into existing systems. The camera offers a frame rate of up to 60 frames per second, making it suitable for high-speed applications. Furthermore, the TS(C)-2076EN features a global shutter, which eliminates motion blur, ensuring accurate image capture in dynamic environments.

Next in the lineup, the TS(C)-2030EN provides a balanced blend of speed and resolution with its 12 megapixel sensor, allowing for both detailed imaging and high frame rates of up to 120 fps. This model is particularly favored in applications such as 2D and 3D inspections, where quick analysis and precision are critical. The camera’s advanced image processing capabilities enhance performance, while its robust build ensures durability in various industrial settings.

The TS(C)-4032EN has been designed for applications requiring exceptional detail, leveraging a high-resolution 41 megapixel sensor. This model offers an impressive frame rate of 30 fps, making it ideal for capturing intricate details in static subjects. Its large sensor size and advanced optics increase light sensitivity, enabling it to perform well in low-light conditions. The camera also supports advanced connectivity options, facilitating seamless integration with various imaging systems.

Lastly, the TS(C)-1327EN focuses on high-speed imaging with a 3.2 megapixel sensor that can achieve frame rates of up to 300 fps. This camera is specifically engineered for fast-moving objects, making it suitable for applications in areas such as robotics and automation. Its compact design, along with superior synchronization features, make it an excellent choice for synchronized multi-camera setups.

Collectively, the JAI TS(C) series combines high image quality, rapid frame rates, and advanced imaging technologies to deliver versatile solutions for industrial applications. Each model is crafted with precision and built to endure, ensuring they remain reliable tools for meeting modern industrial imaging demands.
Top Page Image Contents