Jasco 45246 user manual Camera Channel Selection

9

CYCLE TIME SETTING (Time interval between camera selections)

The default cycle time for the receiver to switch between cameras in auto mode is preset to 4 seconds. To change the cycle time, press and hold both of the buttons (Auto and Manual) on top of the receiver simultaneously. The receiver will beep, pause and then sound a beep for each second of the cycle time, up to 30 seconds. The total cycle time can be verified by the number of LED flashes/ beeps made when you release the buttons—one flash/beep equals one second. Cycle time can be set between 4-30 seconds. If the power adapter is removed or the receiver loses power, the cycle time defaults back to 4 seconds.

CAMERA CHANNEL SELECTION

This wireless surveillance system is designed to monitor up to two cameras. Additional cameras are sold separately.

IMPORTANT: When using more than one camera, each camera must be assigned to a specific channel using the channel selection switch located on the inside the front of the camera housing.