Jasco 99003 user manual FAQs, Making the Switch

A2DP (Advanced Audio Distribution Profi le). The GE 99001 Portable Transmitter only supports A2DP so the music will be muted during the phone call.

Switching Between Audio and Phone Calls

Setting Up / Prerequisite

Using your Bluetooth-enabled phone’s menu, confi rm that the GE 99003 headphones have been added to the “Paired Device” list and connected to your phone. Note: If you haven’t already paired the headset with the Bluetooth-enabled phone, refer to the section “Pairing the headset to a phone for the fi rst time.”

Making the Switch

1.Make sure that both your phone and mobile audio device are paired with the headphones, and that you paired the phone fi rst.

2.Depending upon your phone brand, when you receive a call, the headphones may automatically mute the music and switch to the phone mode – just start talking. If you hear the phone ring, press the play/pause/phone button on the headphones to answer. End a call by pressing the same button again, or wait for the caller to hang up. Music from the audio source will resume when the caller disconnects.

FAQs

1.How can I tell if the headphone’s battery has low power? The battery power is almost exhausted when one or more of the following scenarios occur:

a. The headphones start to reset automatically.

b.You can constantly hear breaks on the audio link about every 30 seconds.

c.Headphones will not connect to any Bluetooth® enabled device.

10