JBL 610 manual Package Contents

Package Contents

1.JBL Reference Series 610 Headphones

2.Carrying Case

3.Bluetooth Transceiver

4.Stereo Phono Adapter

5.Dual Airline Adapter

6.Battery Charger

7.1.75-Meter Optional Audio Cable

using your jbl reference series 610 wireless headphones

Charging Your Headphones

To optimize your JBL 610 headphone system’s performance, the unit must be fully charged prior to operation.

1.Select the proper regional AC adapter plug and assemble onto your battery charger by sliding the plug into the receptacle cavity. (To remove the adapter plug, press the release lever on the charger housing and slide plug in the direction shown.)

2.Connect the mini USB plug on your battery charger to the charge port located on the left ear cup of your headphones.

3.Connect to power outlet and begin charging. Your headphones should reach a complete charge in three (3) hours.

1.

Push and hold

to remove adapter

7.

2.	JBL Reference 610 Automatic Power Saving Mode
3.	6.
	Power button
4.	5.

To extend the single charge battery playing time of your JBL Reference 610 Wireless Headphone, a power “OFF” feature has been built into the system. After 30 minutes of in-activity the headphone will automatically power off. The Bluetooth Transceiver will also shut down and no longer draw power from the iPod.

To re-activate your JBL Reference 610 headphone proceed as follows:

1.Disconnect the JBL Bluetooth Transceiver from the iPod

2.Press Power Button located on the left ear cup (you will see the blue LED light up)

3.Connect the Bluetooth Transceiver to the iPod

The headphone and Bluetooth Transceiver will now re-link with each other.