INSTALLATION
WARNING: Playing loud music in an automobile can hinder your ability to hear traffic and permanently dam- age your hearing. We recommend listening at low or moderate levels while driving your car. JBL accepts no liability for hearing loss, bodily injury or property damage resulting from the use or misuse of this product.
INSTALLATION WARNINGS AND TIPS:
•Always wear protective eyewear when using tools.
•Disconnect the vehicle’s negative
•Check clearances on both sides of a planned mounting surface. Be sure that screws or wires will not puncture brake lines, fuel lines or wiring harnesses, and that wire routing will not interfere with the safe operation of the vehicle.
•When making electrical connections, make sure they are secure and properly insulated.
•If BassPro II’s fuse must be replaced, be sure to use the same type of fuse and current rating as that of the original.
Figure 1. | Figure 2. |
CHOOSING A MOUNTING
LOCATION FOR
BASSPRO II:
Choose a mounting location that doesn’t interfere with cargo, the fold- down rear seat or the trunk lid. The best location is usually a corner of the trunk or cargo area, as shown in Figures 1 and 2.
Securely mount BassPro II to the mounting surface using the four enclosed
Choose a mounting location in the front of the vehicle for the remote level control.
Figure 3. Bottom view of BassPro II.
2
