fast and sharp bass. The low frequency alignment feature enables placing the speakers near or even in a corner without producing an
The Project EVEREST DD66000 requires right or left speaker designation, depending on installed locations. Once speaker locations are decide, please refer to System Orientation in Chapter 8 Control Panel and set it up.
CAUTION: Project EVEREST DD66000 is a massive system comprised of materials chosen for their density, with its weight concentrated in a relatively narrow area. Verify the integrity of the floor surface before placing and setting up the speakers. See Floor Requirements. Remember that these speakers weigh close to 140 kg (308 lbs) each and cannot be easily moved once they are installed.
Floor Requirements
The floor in the location selected for setting up the Project EVEREST DD66000 speakers must be capable of supporting a load of 140 kg (308 lbs). Because of the coupling effect of the stainless steel feet, a flat, hard surface such as wood or linoleum is preferable. However, the design of the loudspeaker's coupling system, along with the speaker's extreme weight, should result in excellent performance on any surface, even on carpets.
To prevent indentations on wood or linoleum floors caused by the weight of the loudspeaker, always utilize the enclosed coasters. Do not set up the Project EVEREST DD66000 system directly on a ceramic tile floor; the concentrated weight might cause the tiles to crack.
