JBL DD66000 manual Final Checklist

banana-type connector is recommended.

As mentioned earlier, the Project EVEREST DD66000 loudspeakers may be connected to the amplifier(s) by one of three methods: passive, bi-wire and bi-amp. Each method, described above, has its own advantages, and the Project EVEREST DD66000 loudspeaker system will deliver superb performance with all methods.

Final Checklist:

∙Connect and plug in all other system electronics .

∙Check all connections. In case of bi-amping or bi-wiring, make sure both shorting straps are removed.

∙Make sure the system orientation and HF/LF drive switching in the control panel are correctly set.

The system is now ready for use. The Project EVEREST DD66000 loudspeaker system is fully functional as soon as it is set up. There may be subtle tonal changes in bass output over the first week to 10 days of operation. These are caused as the movement of the low frequency drivers becomes more fluid and the parts settle in. This process is completely normal and natural with transducers of this caliber. Even during this initial period, there is no restriction on the amount of amplification that may be applied.