JBL DSC 400 A N T E N N A C O N N E C T I O N S, AM loop antenna included FM antenna included

Models: DSC 800 DSC 400

1 50
Download 50 pages 31.79 Kb
Page 16
Image 16
A N T E N N A C O N N E C T I O N S

A N T E N N A C O N N E C T I O N S

Connect the supplied AM and FM antennas as shown for radio reception.

Connect the AM loop antenna to the AM screw terminals.

Connect the FM antenna to the 75 Ohm FM antenna socket.

AM loop antenna (included)

FM antenna (included)

Notes:

To prevent noise pickup, keep the AM loop antenna away from the system and other components.

Be sure to fully extend the FM wire antenna.

After connecting the FM wire antenna, keep it as horizontal as possible. Move it until you receive the best reception.

If you have poor FM reception Use a 75-ohm coaxial cable (not included) to connect the system to an outdoor FM antenna as shown below or to the radio antenna connector on the wall for the roof antenna on your house (if any).

Notes:

If you connect the system to an outdoor antenna, ground it against lightning.

To prevent a gas explosion, do not connect the ground wire to a gas pipe.

Outdoor FM antenna

Ground wire (not included)

To ground

14

Page 16
Image 16
JBL DSC 400, DSC 800 A N T E N N A C O N N E C T I O N S, AM loop antenna included FM antenna included, Outdoor FM antenna