P L A Y I N G D I S C
Basic DISC Playback
IMPORTANT:
Please note that some DVD movie discs may not have all the features described in this chapter. Refer to the instructions or notes included with each disc to determine what features and operations are available on that particular disc.
When a disc is inserted the following will occur depending on the type of disc inserted.
•When playing a DVD, a DVD menu or title menu may appear on the TV screen (see page 20).
•When playing a VCD, CD or MP3 disc the player will go to stop mode. With CDs and MP3 discs the number of all tracks on the disc will be displayed on the front panel display and with MP3 discs the main root directory will appear on the TV screen. With VCDs the message "VCD STOP" will appear on the front display.
Note
•While the disc is loading, the player will not respond to any commands.
1.Turn on the TV and select the video input so that you can view DVD video from this system.
2.Press POWER on the front panel to turn on the system. The front panel display lights up.
3.If the system is not in the DVD player mode, press DVD on the remote control to enter DVD player mode directly, or press SOURCE on the front panel to select it, the JBL logo screen appears on TV.
4.Press the OPEN/CLOSE button, and place a disc on the tray.
Press OPEN/CLOSE again to close the tray. The player begins loading the disc. A message will appear on the TV screen and/or on the front panel display as follows.
On TV screen | On front panel display |
| WAITING |
|
|
DISC LOADING** | LOADING** |
|
|
OPEN | OPEN |
|
|
CLOSE | CLOSE |
|
|
PLAY | PLAY |
|
|
NO DISC | NO DISC |
|
|
BAD DISC | BAD DISC |
|
|
| DVD/VCD |
|
|
WRONG REGION (See page 10)
PARENTAL VIOLATION (See page 33)
(**NOTE: While the disc is loading the player
will not respond to any commands).
5. While in the stop mode, press / B (PLAY/PAUSE) to begin playback . When playback begins, press ADJ/VOL +/- to adjust the volume to a confortable listening level. To shut off the speakers temporarily without stopping playback, press MUTE on the remote control. Press MUTE again to cancel mute and restore the sound. During playback press PLAY/PAUSE ( / B) again to pause playback temporarily. Press once more to cancel pause mode and resume playback.
6.Press STOP (A) to stop playback. The DVD disc will then cease playing. If the Play/Pause button is pressed, the DVD disc will continue to play from the point at which Stop was pressed. Pressing STOP a second time exits the DVD completely. In program playback mode, press STOP (A) one time to stop playback.
Press it again to clear program memory. (See page 22).
7.When the system is on, press STANDBY on the remote control to turn the system off. The LED on the front panel lights up red. In standby mode, press this button to turn ON the system. You can also turn the system on by pressing SOURCE on the main unit.
18
