InFocus 560, 570 manual Connecting a Composite Video Cable

Setting Up the LitePro

10.If you have a LitePro 570, you can connect it to your computer’s sound board. Use the LitePro’s audio/video cable to connect the left and right channels of your sound board to the left and right connectors on your LitePro. (Be sure to plug the audio cable into the same SOURCE area that your computer is plugged into.)

If the audio connector on your computer’s sound board is a

mini-type jack, you will need an RCA jack-to-mini plug adapter. Refer to ”Accessories” on page 53 for order information.

11.If you have a LitePro 570, you can connect it to a video player (laser disc, VCR, or camcorder).

•If your video player provides a composite signal, its video-out connector is a small, round RCA type jack. Using the audio/ video cable that came with the LitePro, plug the yellow connector into the video-out jack on the video player. Plug the other yellow connector into the composite connectors in the “SOURCE 3” or “SOURCE 4” areas on the LitePro as shown below.

connect video cable to either SOURCE 3 or SOURCE 4 connector

Figure 8. Connecting a Composite Video Cable

LitePro 560/570 User’s Guide 11