Prev, Mute, Mic, Freeze/esc, Lite show, Volume | InFocus 570, 560

Using the LitePro

prev

LP 560LS & LP 570LS: When a LiteShow presentation is displayed, press the prev button to go back to the previous slide in your presentation. Refer to the LiteShow User’s Guide for information.

mute

LP 570 & LP570LS: Pressing mute enables and disables both the external and internal audio functions.

mic

LP 570 & LP 570LS: Pressing mic enables and disables the microphone.

freeze/esc

The operation of the freeze/esc button depends on what is displayed. When a computer image, a video image or a menu is displayed, press freeze/esc to pause the display. Press it again to return to the current image.

LP 560LS & LP 570LS: When a LiteShow presentation is displayed, press freeze/esc to exit LiteShow menus and cancel LiteShow operations. Refer to the LiteShow User’s Guide for more information.

lite show

LP 560LS & LP 570LS: Press lite show to switch to your LiteShow presentation. Press lite show again to return to your computer or video image. Refer to the LiteShow User’s Guide for information about using LiteShow.

volume

LP570 & LP 570LS: Pressing either end of the volume button adjusts the volume of the active audio source. (To activate a different audio source or lock the volume onto one source, see “Volume and Audio Lock” on page 36.)

22	LitePro 560/570 User’s Guide

Image 30

InFocus 570, 560 manual Prev, Mute, Mic, Freeze/esc, Lite show, Volume

Contents

LCD Projector Users Guide Fold and tear here Page Page Certifications Declaration of Conformity Contents Power Cord Safety SummaryPower Source Do not look into the lens Lamp GroundingFuse Hot Surfaces Introduction Not shown Compatibility Cables and Adapters Remote Control Programmer Kit Usage GuidelinesIf You Need Assistance Setting Up the LitePro Image Size measured diagonally Connecting the LCD end of the LitePro cable Connecting an IBM-compatible desktop computer Connecting a Macintosh desktop computer Connecting an IBM-compatible laptop computer Connecting a Macintosh PowerBook Connecting a Composite Video Cable Connecting an S-Video Cable Connecting the Audio from a Video Player Connecting an external speaker Connecting a microphone Setting Up the LitePro Using the Remote Control Using the LiteProBasic Image Adjustment Turning the LitePro Off Focusing the Image Adjusting the Height Switching to the Spare Lamp Switching to the Spare Lamp Using the Remote Control Buttons Menu Arrow buttons Select/enterNext Mute VolumePrev Mic Prog Standby Using the Menus Menu Audio Menu Highlighting Menu FunctionsMaking Changes to Menu Functions Removing the Menu from the Screen Resetting Menu Functions to the Default SettingsMenu 1 Functions Brightness Sync Up/DownLeft/Right Menu 2 Functions Rear ProjectionSource Prompt Test Pattern RS-232Auto Standby Reset Ntsc Source Enable Palette Prog Button Language Tracking Text Mode and Pixel Slice Video Type Comp Sharpness Volume and Audio Lock Audio Menu Functions Bass TrebleBalance and Fade Loudness Maintenance Cleaning the Lens Replacing the Projection Lamps Opening the Lamp Door Replacing Batteries in the Remote Control Bulb Guard Installing New Batteries Replacing the Fuse Locating the Fuse Removing the Fuse Holder Troubleshooting Before You Call for Assistance Solutions to Common Problems Problem Nothing on screenProblem Color or VGA text not being projected Problem Image is too wide or narrow for screen Problem Image is not centered on the screenProblem Only the test pattern is displayed Problem Image is out of focus Problem Image is noisy or streaked Problem Image and menus are reversed left to rightProblem LitePro displays vertical lines, bleeding or spots Problem Projected colors don’t match the monitor’s colors Specifications Appendix Appendix Accessories Cable Connector Pin Assignments LCD Connector Monitor and VGA Connectors GND Laptop Display Activation Chart AST FN-F1 Appendix Index Assistance, see Technical Support audio Lite show button 22 LitePro Quadra, see Macintosh Index Limited Warranty 010-0060-05 USA