Setting Up the LitePro

If you have a Macintosh desktop computer with a separate monitor, attach one of the Mac adapters to the “VGA” end of the LitePro cable. Then plug the Mac adapter into the monitor connector on the computer.

If you want to display your presentation on your monitor as well as on the projection screen, attach the “Monitor” end of the LitePro cable to the other Mac adapter. Then connect the Mac adapter to the end of the monitor cable as shown below.

power switch “Monitor” end of Mac adapter monitor cable

Mac adapter “VGA” end of

LitePro cable

LitePro cable

Figure 5. Connecting a Macintosh desktop computer

8

LitePro 560/570 User’s Guide

Page 16
Image 16
InFocus 570, 560 manual Connecting a Macintosh desktop computer