InFocus 560, 570 manual Connecting a microphone

Setting Up the LitePro

14.If you have a LitePro 570, you can connect it to a microphone. Insert the microphone cable into the 3-prong XLR microphone jack on the LitePro.

Always keep the source volume at its lowest level when installing the microphone. For setting the microphone level, refer to”Volume and Audio Lock” on page 36.

Figure 12. Connecting a microphone

15.Turn on your monitor.

16.Plug the power cord into the projector, then plug it into your electrical outlet.

Always use the power cord that was shipped with your LitePro. The projector accepts power from 100 VAC and 220 VAC, 50 or 60 Hz, three-wire type grounded sources. When you disconnect the projector, always remove the power cord from the electrical outlet first, then from the projector.

LitePro 560/570 User’s Guide 15