Using the LitePro

Focusing the Image

To focus the image, rotate the projection lens until the image is clear. Rotate the lens clockwise for a longer focusing distance. Rotate it counterclockwise for a shorter focusing distance.

Adjusting the Height

Your LitePro is equipped with a self-locking, quick-release elevator foot. If the projected image seems wider at the bottom than at the top, extend the elevator foot until the distortion is corrected.

To raise the LitePro:

1.Raise the front of the projector off the table by lifting up on the handle.

2.Press the quick-release button (just inside the handle). The eleva- tor foot releases.

3.Gently lift or lower the projector to the desired height. When you release the handle, the elevator foot locks into position.

4.To more closely adjust the projector’s height, rotate the elevator foot clockwise to raise the projector. Rotate it counterclockwise to lower the projector.

To lower the elevator foot:

Holding the LitePro handle, press the elevator’s quick release button. Push the elevator back up into the projector.

Always hold the LitePro’s handle when you press the

elevator’s quick release button.

18

LitePro 560/570 User’s Guide

Page 26
Image 26
InFocus 570, 560 manual Focusing the Image, Adjusting the Height