Using the LitePro
To enable Auto Standby:
1.Press the menu button to display Menu 1.
2.Use the right or left arrow buttons to highlight “Menu 2”.
3.Press select/enter to display Menu 2.
4.Use the right or left arrow buttons to highlight “Auto Standby”.
5.Press select/enter to cycle through the settings.
Reset
The Reset function changes all the menu function settings back to the factory default states.
The defaults are: |
|
|
|
| |
• | Rear Projection | off | • | Test Pattern | on |
• | Source Prompt | on | • | on | |
• | Auto Standby | 30 minutes | • | Reset | off |
• | Source Enable | all sources enabled | • | Text Mode | off |
• | Prog Button | clear white | • | Comp(ress) | off |
• | Palette | 24,389 | • | Sharpness | off |
• | Language | English | • | Loudness | off |
• Video Type | NTSC | • Mute | off | ||
To reset your adjustments:
1.Press the menu button to display Menu 1.
2.Use the right or left arrow buttons to highlight “Menu 2”.
3.Press select/enter to display Menu 2.
4.Use the right or left arrow buttons to highlight “Reset”.
5.Press select/enter. The LitePro immediately resets all the function settings.
30 | LitePro 560/570 User’s Guide |
