InFocus 560, 570 manual Connecting an IBM-compatible laptop computer

Setting Up the LitePro

•If you have an IBM-compatible laptop computer, plug the “VGA” end of the LitePro cable into the external video connector on the computer as shown below.

power switch	“Monitor” end of	“VGA” end of
	LitePro cable	LitePro cable

Figure 6. Connecting an IBM-compatible laptop computer

The LitePro connects to a laptop computer through the computer’s external monitor port. Most laptop computers do not automatically activate their external monitor port when a device such as the LitePro is connected. Refer to your computer manual for the command that activates the external video port. The ”Laptop Display Activation Chart” on page 56 lists the commands that activate the external monitor port for a variety of computers.

LitePro 560/570 User’s Guide 9