Setting Up the LitePro

If your video player provides an S-Video signal, its video-out connector is a slightly larger, round, four-pin S-Video jack. You cannot use the audio/video cable that came with the LitePro; you will need to obtain an S-Video cable. Plug your S- Video cable into the S-Video connectors in the “SOURCE 3” or “SOURCE 4” areas on the connector panel as shown below.

connect video cable to either SOURCE 3 or SOURCE 4 connector

Figure 9. Connecting an S-Video Cable

The video-out connector on your video player may be labeled

“To Monitor.”

12

LitePro 560/570 User’s Guide

Page 20
Image 20
InFocus 570, 560 manual Connecting an S-Video Cable