Using the LitePro
Menu 2 Functions
Rear Projection
When you select Rear Projection, the LitePro reverses the image so you can project from behind the screen as shown here.
To enable or disable to rear projection mode:
1.Press the menu button to display Menu 1.
2.Use the right or left arrow buttons to highlight “Menu 2”.
3.Press select/enter to display Menu 2.
4.Use the right or left arrow buttons to highlight “Rear Projection”.
5.Press select/enter to enable Rear Projection. The image immediately changes to display the mirror image. (Press select/ enter again to change it back.)
Source Prompt
When you are displaying your presentation and you press select/ enter to switch sources, the LitePro momentarily displays the name of the active source. If you don’t want this display, follow the steps below to disable the Source Prompt.
To enable or disable the Source Prompt:
1.Press the menu button to display Menu 1.
2.Use the right or left arrow buttons to highlight “Menu 2”.
3.Press select/enter to display Menu 2.
4.Use the right or left arrow buttons to highlight “Source Prompt”.
5.Press select/enter to enable or disable the Source Prompt.
28 | LitePro 560/570 User’s Guide |
