Setting Up the LitePro

8.Connect the LitePro cable to the monitor connector on your com- puter according to the instructions below. Follow the instructions that apply to your computer.

The resolution of the LitePro’s image is 640x480. Images between 640x480 and 800x600 resolution are displayable, but will be compressed. Images above 800x600 are not displayable.

If your computer’s screen resolution is greater than 800x600, you will need to reset it to 800x600 or less. Refer to your computer’s documentation for instructions.

If you have a an IBM-compatible desktop computer, plug the “VGA” end of the LitePro cable into the monitor connector on the computer.

If you want to display your presentation on your monitor as well as on the projection screen, attach the “Monitor” end of the LitePro cable to the end of the monitor cable as shown below.

power switch

“Monitor” end of

monitor cable

“VGA” end of

 

LitePro cable

 

LitePro cable

Figure 4. Connecting an IBM-compatible desktop computer

LitePro 560/570 User’s Guide

7

Page 15
Image 15
InFocus 560, 570 manual Connecting an IBM-compatible desktop computer