Setting Up the LitePro

If you have an Apple PowerBook computer, you’ll need the video-out cable that came with your PowerBook and one of the Mac adapters that came with the LitePro. Connect the video-out cable to the video-out port on the back of the PowerBook. Connect the Mac adapter to the video-out cable. Connect the LitePro cable to the Mac adapter as shown below.

If you have an Apple PowerBook Duo computer, you must have a DuoDock adapter (which provides a video out connector). You’ll also need one of the Mac adapters that came with the LitePro. Follow the instructions for connecting a PowerBook.

Mac adapter

“VGA” end of LitePro cable

power switch “Monitor” end of

video out

LitePro cable

cable

Figure 7. Connecting a Macintosh PowerBook

Tighten the thumb screws on all cable connectors to ensure

proper grounding.

9.If you want to connect a second computer, connect it to the LitePro’s “RGBHV” connector with a 15-pin cable. (The RGBHV connector is in the “SOURCE 2” area of the connector panel.)

10

LitePro 560/570 User’s Guide

Page 18
Image 18
InFocus 570, 560 manual Connecting a Macintosh PowerBook