Fortinet 2 SXRC Display, the highest gain setting of the group, Adjustments in the Gain menu

You See

AMP1AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

00 120

MEM-4

MEM-4

00

AMP1AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

You See

Amp 2

AMP1AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

00 00

MEM-4

00

MEM-4

MEM-4

00

ESC HOME ENT

ESC HOME ENT

ESC HOME ENT

Example 3

Group-07 has two amplifiers in it, amp 1 has both channels gain set at 0.0 while amp 2 is at 0.0. When you select this group to adjust the gain you will see

0.0 in the display, the highest gain setting of the group.

Amp 1

AMP1 AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

00

MEM-1 MEM-2 MEM-3

Use the UP and DOWN keys to scroll

through LEFT CHN, RIGHT CHN or BOTH CHNS

and then press the ENT key to select. SX.1 Series do not have Left or Right channel options since it is a Mono-Block design. Skip this step and move to next paragraph.

Operation

Since the gain range is 12 dB (0.0 dB to MEM-1MEM-2MEM-312.0 dB) and both amplifier’s channels are set at 0.0 dB, the SXRC will let you

adjust through the full gain range. When

Now use the UP and DOWN keys to increase or decrease the gain of the selected group’s channel(s) in .5 dB increments from 0 dB to +12 dB. (0.0 to 12.0)

you try to increase or decrease the gain

MEM-1 MEM-2 MEM-3

Press the ESC key to save your adjustment

setting of this group, you will have a full 12 dB swing up and down on both channels.

and return to the LEFT, RIGHT, BOTH options menu. You can now select another channel to adjust in this group if desired. Does not

Example 4

Group-09 has two amplifiers in it, amp 1 has channel gains set at 0.0 (Left) and 12.0 (Right) while amp 2 is at 0.0 (Left) and 12.0 (Right). When you select this group to adjust the gain you will see 0.0 (Left) and 12.0 (Right) in the display, the highest gain settings of the group.

Amp 1

AMP1 AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

00 120

MEM-1 MEM-2 MEM-3 MEM-4

Amp 2

AMP1 AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

00 120

MEM-1 MEM-2 MEM-3

apply to SX.1 Series. Pressing the ESC key at this point on a SX.1 Series amplifier exits the GAIN menu.

When you are done adjusting the gain in this
group press the ESC key while in the LEFT
CHN, RIGHT CHN, BOTH CHNS options menu	ESC	HOME ENT
to return to the GROUP ADJ menu and
choose another function to adjust.

NOTE:

Since the gain range is 12 dB

(0.0 dB to 12.0 dB) for both channels, and each channel on each amplifier is

MEM-1 MEM-2 MEM-3

While you are in the GAIN menu the GAIN indicator on the ISIS VFD display is lit. This indicates you are making

AMP1 AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

b otth chhnns

separated by 12 dB, you can only adjust the gain if you do each channel separately. Choosing BOTH CHNS will not work but choosing just the LEFT CHN or RIGHT CHN will allow full adjustment of 12 dB on that channel.

adjustments in the GAIN menu.

The LEFT and RIGHt indicators will light up as well to indicate which amplifier’s channel(s) you are currently adjusting.

MEM-1 MEM-2 MEM-3 MEM-4

AMP1 AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

1005 10 5

MEM-1 MEM-2 MEM-3 MEM-4

SXRC Remote Control 41