Fortinet 2 SXRC Oth chhnns, Degree or180 degree. Press the ESC, Both chns, left chn and right chn

ESC HOME ENT

ESC HOME ENT

phase MENU - Here is where you can switch the polarity of each channel(s) output between 0 or 180 degrees.

Use the UP and DOWN keys to scroll

through both chns, left chn and right

There is also a LEFT and RIGHT indicator in the ISIS display that will light up indicating which channel(s) (Left and/or Right) are currently being adjusted.

AMP1 AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

0 deeggrre e

MEM-1 MEM-2 MEM-3 MEM-4

Operation

chn then press the ENT key to select. SX.1 Series does not offer Left or Right Channel

option...Only 0 Degree or 180 Degree for the entire amplifier since it is a Mono-Block design. Skip this step and move to next paragraph.

Use the UP or DOWN keys to select from

0 degree or180 degree. Press the ESC

key to save your setting and return to the

both chns, left chn and right chn

options menu. You can now select another phase option to adjust on this amplifier if desired.

Does not apply to SX.1 Series. Pressing the ESC key at this
point on a SX.1 Series amplifier exits the PHASE menu.
When you are done adjusting the phase on
this amplifier press the ESC key while in the
Both chns, left chn and right chn	ESC	HOME ENT

options menu to return to the AMP ADJ menu and choose another function to adjust.

By default, all channels in all amplifiers ares set to 0 Degree.

NOTE:

While you are in the PHASE menu the PHASE indicator on the ISIS display is lit. This indicates you are making adjustments in the PHASE menu.

AMP1 AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

b oth chhnns

MEM-1 MEM-2 MEM-3 MEM-4

34 SXRC Remote Control