Fortinet 2 SXRC manual Lope, Press the ENT key to select

1006 hz

AMP1AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

lo-passMENU - Here is where you adjust the selected amplifier’s low pass crossover.

Use the UP and DOWN keys to scroll through frequency and slope and then

press the ENT key to select. ESC HOME ENT

When you are done adjusting the low pass
crossover on this amplifier press the
ESC key while in the frequency and	ESC	HOME ENT
slope options menu to return to the AMP ADJ
menu and choose another function to adjust.

Operation

FREQUENCY selects the crossover point and can be set at any 1/12th octave spaced frequency from 30 Hz to 20 kHz.

(30 Hz to 20325 Hz) SX.1 Series is 30 Hz to 200 Hz in 1 Hz steps.

NOTE:

While you are in the LO-PASS menu the LPF indicator on the ISIS display is lit. This indicates you are making adjustments in the LO-PASS menu.

AMP1 AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

s lope

MEM-1 MEM-2 MEM-3 MEM-4

Use the UP and DOWN keys to select your
frequency. Press the ESC key to save your
setting and return to the frequency and
slope options menu. You can now select	ESC	HOME ENT
another low pass crossover option to adjust
on this amplifier if desired.

The KICKER SXRC monitors and prevents any low pass crossover point from being set any closer than 1/3 octave from the high pass crossover point. If you cannot set the low pass crossover where you want then check the ISIS display and see if the LPF is lit and the HPF indicator is flashing. If it is then you need to go to the

SLOPE selects the roll-off of the crossover and can be set from oFF to 36 dB/OCT in 6 dB steps. SX.1 Series is OFF to

HI-PASS menu and lower the high pass crossover point.

MEM-1 MEM-2 MEM-3 MEM-4

48 dB in 6 dB Steps.

Use the UP and DOWN keys to select your
low pass crossover slope. Press the ESC
key to save your setting and return to the
frequency and slope options menu. You	ESC	HOME ENT
can now select another low pass crossover
option to adjust on this amplifier if desired.

This is done as a safety precaution to prevent a notch filter condition.

32 SXRC Remote Control