Fortinet 2 SXRC »Eq, Link Off AMP ADJ, Link Off Group ADJ, Link On AMP ADJ, Link On Group ADJ

»GAIN

»MUTE

»KOMPRESSOR

»PINK NOISE

Operation

LINK MENU - Here you can set the Link property of the selected group to Link On or Link Off. By default all groups have the Link property set to Link Off.

The Link property sets a group to have certain characteristics depending on the setting (Link On or Link Off). By adjusting this one setting you completely change what settings and adjustments are shared between amplifiers in the group, what settings you can select to adjust in the AMP ADJ and GROUP ADJ menus and how certain settings act once they are selected. You have all ready seen an example of this in the GROUP ADJ menu when adjusting the Kompressor™.

Link Off - AMP ADJ

If you set the group’s Link property to Link Off each amplifier in the group can have these items adjusted from the AMP ADJ menu.

» GAIN	» KOMPRESSOR
» EQ	» KOMP. ADJ.
» LO-PASS	» GAIN RANGE
» HI-PASS	» BYPASS DSP
» PHASE	» PINK NOISE
» MUTE

Link Off - GROUP ADJ

If you set the group’s Link property to Link Off each amplifier in the group can have these items adjusted from the GROUP ADJ menu.

Link On - AMP ADJ

If you set the group’s Link property to Link On each amplifier in the group can have these items adjusted from the AMP ADJ menu.

»GAIN

»MUTE

Link On - GROUP ADJ

If you set the group’s Link property to Link On each amplifier in the group can have these items adjusted from the GROUP ADJ menu.

»GAIN	»MUTE
»EQ	»KOMPRESSOR
»LO-PASS	»KOMP. ADJ.
»HI-PASS	»GAIN RANGE
»PHASE	»PINK NOISE

Wow...things do change up quite a bit. But why? Glad you asked! The following two examples show why this happens and why the Link function exists...but we know there are many more.

Example 1

You have four SX.1 Series amplifiers driving four Solobaric L7 12 inchers. First off...you got game baby! Deep smooth bass for days...you could share some with the boys lounging around down at Local 317 and still have plenty! Ok...enough of that...here is one of the many reasons the Link function exists.

You would want to control all of these amplifiers together and share many settings between them the same since they are all on bass duty.

66 SXRC Remote Control