n oise on
AMP1AMP2
LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

Operation

pink noise MENU - Here you can activate the integrated pink noise generator of the selected SX Series amplifier and is very useful for testing and troubleshooting your system.

Pink noise is a sound made up of equal energy at all 1/3 octaves from 20 Hz to 20 kHz and sounds like the static between radio stations.

When activated, pink noise is generated by the SX amplifier’s DSP and fed into both the left and right channels.

REMOTE VOL MENU - Here you can choose to have the selected SX Series amplifier’s output level controlled by the Digital Remote Volume Control (DRVC).

If you wish to use the DRVC as a master volume control, raising and lowering the output level of all the amplifiers, leave all amplifiers set to REMOTE ON. By default, all amplifiers are set to

REMOTE ON.

If you wish to use the DRVC as a bass level controller, raising and lowering the output level on subwoofer amplifiers only, set

Use the UP or DOWN keys to scroll

through noise off and noise on.

Press the ESC key to save your setting and return to the AMP ADJ menu to select another function to adjust.

ESC HOME ENT

ESC HOME ENT

the REMOTE VOL to REMOTE OFF on your non-subwoofer amplifiers.

These are the two most common uses. You can configure whatever combination works for your particular installation.

Use the UP or DOWN keys to scroll

through REMOTE ON and REMOTE OFF.

NOTE:

When the pink noise is activated (NOISE ON) the LEFT and RIGHT indicators on the ISIS display will begin blinking. This indicates that the PINK

NOISE generator is active.

MEM-1 MEM-2 MEM-3 MEM-4

Press the ESC key to save your setting and return to the AMP ADJ menu to select another function to adjust.

ESC HOME ENT

ESC HOME ENT

If you exit the PINK NOISE menu with the generator on (NOISE ON) the left and RIGHT indicators in the ISIS VFD will stay flashing to indicate this.

The LEFT and RIGHT indicators will stop LOCK

LEFT SYS

RIGHT

MUTE

 

AMP1

 

 

AMP2

flashing once you turn off (NOISE OFF) the

GAIN EQ LPF HPF PHASE KOMP

noise

offf

pink noise generator.

MEM-1

MEM-2

MEM-3

MEM-4

NOTE:

While you are in the REMOTE VOL menu the SYS indicator on the ISIS display is lit. This indicates you are making adjustments in the REMOTE VOL menu.

AMP1 AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

remotte on

MEM-1 MEM-2 MEM-3 MEM-4

38

SXRC Remote Control

Page 38
Image 38
Fortinet 2 SXRC manual Remotte on, Through noise off and noise on, Through Remote on and Remote OFF, Pink noise generator