EQ MENU - Here is where you adjust the selected amplifier’s single band parametric equalizer.

Use the UP and DOWN keys to select your bandwidth (Q) value and press the ESC to save your setting and return to the

Use the UP and DOWN keys to scroll

frequency, boost/cut, bandwidth

ESC HOME ENT

through frequency, boost/cut and

bandwidth and then press the ENT key to

options menu. You can now select another equalizer option to adjust on this amplifier if desired.

select.

ESC HOME ENT

FREQUENCY selects the center frequency of the equalizer and can be set at any 1/12th octave spaced frequency from 20 Hz - 20 kHz. (20 Hz to 20325 Hz) SX.1 Series is 10 Hz to 200 Hz in 1 Hz Steps.

Boost/Cut is where you boost or cut the equalizer and has a range of 36 dB; -18 dB to +18 db in .5 dB steps. Keep in mind that for every 3 dB of boost you are requiring the amplifier to use twice as much power in that equalized area. The default setting from KICKER is FLAT (No boost or cut).

Operation

Use the UP and DOWN keys to select your frequency. Press the ESC key to save your setting and return to the frequency,

boost/cut, bandwidth options menu. You

ESC HOME

ENT

 

 

can now select another equalizer option to

 

 

adjust on this amplifier if desired.

 

 

bandwidth (better known as Q) can be set from .5 to 10 in .5 increments. In simple terms, lower Q effects more frequencies around the center frequency while higher Q effects fewer frequencies around the center frequency.

As an example, if our center frequency is 100 HZ, a Q of .5

Use the UP and DOWN keys to adjust your boost or cut and press the ESC key to save your setting and return to the

frequency,boost/cut,bandwidth options

menu. You can now select another equalizer option to adjust on this amplifier if desired.

When you are done adjusting the equalizer on this amplifier press the ESC key while in the

frequency, boost/cut, bandwidth

options menu to return to the AMP ADJ menu and choose another function to adjust.

ESC HOME ENT

ESC HOME ENT

(area in gray) effects many more frequencies around 100 Hz

than a Q of 10 (area in black)

 

There is no right or wrong Q,

 

you use whatever fits the

 

needs of the system or

Q=.5

personal taste. KICKER uses

Q=10

a default Q of 3.

100 HZ

NOTE:

While you are in the EQ menu the EQ indicator on the ISIS display is lit. This indicates you are making adjustments in the EQ menu.

AMP1 AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

f requenc y

MEM-1 MEM-2 MEM-3 MEM-4

SXRC Remote Control

31

Page 31
Image 31
Fortinet 2 SXRC manual Requenc y, Through frequency, boost/cut