Advanced Features, Dual Alarms and Timer Recording, Setting the

ADVANCED FEATURES

Dual Alarms and Timer Recording

Alarm and Timer Setting

8. Press the Set/Station button ° to enter the

Alarm 1

Alarm 2

minutes. “OFF” will flash in the display c,

JBL Soundgear offers a flexible dual alarm and

and the menu will now guide you through set-

ACTUAL TIME

timer capability, which allows you to program

JBL SOUNDGEAR PLAYS

ting the time the system will turn off.

the system to either play or record two different

9. Program the time to turn off in the same way

ON TIME

OFF TIME

ON TIME

OFF TIME

sources at two different times, for as long a

as the time to turn on, by using the Preset

(AM 6:00)

(AM 7:00)

(AM 7:10)

(AM 8:00)

duration as you choose.

7. If the settings of the timers overlap, then

Down or Up buttons cg4to select the hour

1. Make sure the current time displayed cis

or minute, and the Set/Station button ° to

JBL Soundgear will turn on at the earliest set

correct by pressing the Clock button ª; see

enter the setting.

turn-on time and play continuously until the

the Setting the Clock section of this manual on

10. Set the volume level by pressing the Preset

later turn-off time. It will only play the source

p. 10 to set the clock correctly. If you plan on

that was selected for the earlier timer, and will

Down or Up buttons cg4.

selecting the Tuner,

make sure that the desired

not play the source that was selected for the

11. Press the Set/Station button ° to enter

station has been

programmed as a preset (see

later timer.

the selected volume level. The clockface and the

Programming Preset Stations section on p. 12).

Alarm 1

Alarm 2

Alarm number (1 or 2) will remain lit in the dis-

2. Press the Alarm 1 £ or Alarm 2 ¢ button

play w, and the alarm will be set and armed.

to enter the timer setting mode. (If the timer

ACTUAL TIME

12. When you turn the power off Á1, JBL

was previously set, press and hold the button

JBL SOUNDGEAR PLAYS

Soundgear will automatically turn itself on at

for more

than 1.5

seconds.) The Alarm/Timer

TIME

OFF

TIME

ON TIME

OFF TIME

the programmed time and play and/or record the

clockface

indicator

will appear in the display

(AM

6:00)

(AM

7:10)

(AM 7:00)

(AM 8:00)

selected source for as long as it has been pro-

wand

the available source selections –

grammed to play.

Setting the

TUNER, CD, TAPE – will flash in the display

in turn.

To Cancel or

Sleep Timer

3. (a) If you want to select the Tuner, press

the Set/Station button ° while TUNER

Check the Timer:

appears in the display window c. “Play”

(Available only using the remote control)

Each time the Alarm 1 £ or Alarm 2 ¢ but-

and “Rec” will flash in turn.

When the sleep timer is used, the power is

ton is pressed you can arm or disarm that alarm.

(b) Press the Set/Station button ° to

automatically turned off after the specified time

If the alarm was previously set, press the button

select either Play or Rec.

has elapsed.

£¢ twice to display the alarm settings. Press

• Play: Tuner plays only

1. To specify the time until the power is turned

it once to disarm the alarm, but retain any set-

• Rec: Tuner plays and is recorded by

off, press the Sleep button $. “SLEEP 90” will

tings in memory. When the alarm is armed, the

Deck B. Make sure that a blank cassette is

appear in the display cfor about 5 seconds.

clockface and alarm number (1 or 2) indicators

loaded in Deck B and rewound to its beginning

This means that the unit will turn off automati-

will light in the display was will the REC indi-

or desired starting point.

cally after 90 minutes. Each time the Sleep but-

cator xif applicable. When the alarm is dis-

ton $is pressed while the SLEEP display

armed, the indicators will go out.

cg4to select a desired radio station. If no

appears, the time interval before the unit will

Preset stations have been programmed into

Alarm and Timer Notes

turn off is reduced by 10 minutes (e.g., 80...70...).

memory, JBL Soundgear will default to the last

Select the desired time interval before turn-off.

1. The Alarm indicator wwill flash when the

tuned station.

2. To check the remaining time until the power

unit is playing in Alarm mode. Press the Alarm

(d) Press the Set/Station button ° to

is turned off, while the sleep function is active,

button £¢ to defeat the alarm, which will not

enter the selected preset number.

press the Sleep button $briefly. The time

shut the unit off.

4. If you wish to select a CD or Tape, press

remaining until turn-off is displayed for about 5

2. When CD or Tape is selected for playback, if

the Set/Station button ° while CD or TAPE

seconds.

no disc is in the disc drawer or no cassette tape

appears in the display window c.

Note: If you press the Sleep button $while

is in the cassette deck, the Tuner function will

If you have selected CD, or Tape A, “PLAY” and

the sleep time is displayed,

the SLEEP timer will

turn on instead.

“REC” will flash alternately in the display c.

reduce the time until turn-off.

Press the Set/Station button ° to select

3. When CD is selected for playback, Repeat

3. To cancel the sleep timer,

press the Sleep

All Disc will be selected automatically.

either PLAY or REC. If you choose to make a

button $repeatedly until “10” appears, and

4. When TAPE is selected for playback, if both

recording, make sure that a blank cassette is

then press the SLEEP button once again while

cassette decks have cassette tapes; the cas-

loaded in Deck B and rewound to its beginning

“10” is displayed.

sette tape in Deck B will play first.

or desired starting point.

5. If the unit is turned on manually, it will not

5. Set the hour by pressing the Preset Down or

shut off automatically at the programmed turn-

Up buttons cg4.

off time.

6. Press the Set/Station button ° to enter the

6. If both Alarm 1 and Alarm 2 are set, and their

hour the alarm will turn the selected source on.

times do not overlap – that is, the earlier alarm

The minutes will flash c.

is programmed to turn off before the later alarm

7. Set the minutes by pressing the Preset

will turn on – then both alarms will turn the unit

Down or Up buttons cg4.

on and off as programmed.

JBL SG2020, SG3030 Advanced Features, Dual Alarms and Timer Recording, Setting the, Sleep Timer

Models: SG3030 SG2020

ADVANCED FEATURES

Dual Alarms and Timer Recording

Alarm and Timer Setting

Setting the

To Cancel or

Sleep Timer

Check the Timer:

Alarm and Timer Notes