JBL SG3030, SG2020 Remote Control Operation, Batteries, Using the Remote Control, Getting Started

GETTING STARTED

Remote Control Operation

Batteries

Before using the remote control for the first time, insert two AAA (UM-4, IEC R03)-type high- quality batteries, as shown in the diagrams below. Be sure to observe correct battery polarity (+ and –), as installing the batteries incorrectly may damage the remote. Do not use different types of batteries together, and do not mix old ones with new ones.

Using the Remote Control

Open the battery cover

Insert two AAA batteries

A A A

A A A

Approx. 23 ft. (7m)

	POWER
	TUNER	MUTE
	TAPE A	PRESET
		TAPE B
		AUX
	REPEAT
	/	/
		REMAIN
	CD
PROGRAM	DISC
	SKIP
	SEEP
VOLUME	VMAX
	EQ.
	PATT
	DISPLAY

POWER

TUNER

A

TAPE

MUTE
PRESET
	AUX
B
TAPE
	/
	REMAIN
REPEAT	/
	CD
	DISC
	SKIP
PROGRAM
	VOLUME

SEEP

VMAX

.PATT EQ

DISPLAY

•When you are not going to use your

JBL Soundgear system for an extended period of time, such as when you go on vacation, remove the batteries to prevent possible electrolyte leakage.

•After a period of time, when the remote control fails to operate accurately at maximum distance from the unit (23 feet, or 7 meters), replace the dead batteries with new ones.

Control Range

The remote control device is designed for a maximum range of 23 feet (7 meters).

NOTE:

Strong light or obstacles between the remote control device and the main unit may interfere with the operation of the remote control.

8