Jenn-Air 8111P490-60 USING YOUR COOKTOP, SURFACE CONTROLS, SUGGESTED HEAT SETTINGS, CONTROL LOCATIONS, DUAL ELEMENT, BRIDGE ELEMENT, ON INDICATORS, SETTING THE, CONTROLS

USING YOUR COOKTOP

SURFACE CONTROLS

Use to turn on the surface elements. An infinite choice of heat settings is available from Lo to Hi. The knobs can be set on or between any of the set- tings.

CONTROL LOCATIONS

Model JEC8536

1.Left front element2.Left rear element (bridge element)3.Center element4.Right rear element5.Right front element (dual element)

Model JEC8430

1.Left front element

2.Left rear element3.Right rear element4.Right front element (dual element)

DUAL ELEMENT

The cooking surface is equipped with a dual element located in the right front position. To operate, push in on the control knob and turn to the right to control the small element, or push in

and turn to the left to control the large
element.	2	LO
		LO
		HI
		HI
	4
		4
6
		2
8

HILO

OFF

Drawing shows control knob markings for Dual and Bridge (select models) elements

BRIDGE ELEMENT

(SELECT MODELS)

For added flexibility, the cooking surface is equipped with a bridge element to accommodate longer gourmet pans and skillets. The bridge element is located in the left rear position. To operate, push in on the control knob and turn to the right to control the small element, or push in and turn to the left to control the bridge element.

ON INDICATORS

All Models- A red indicator light will glow when any element is turned ON.

SUGGESTED HEAT SETTINGS

The size, type of cookware and cooking operation will affect the heat setting.

Hi: Use to bring liquid to a boil. Always reduce setting to a lower heat when liquids begin to boil or foods begin to cook.

6-8: (medium high) Use to brown meat, heat oil for deep fat frying or sauteing. Maintain fast boil for large amounts of liquids.

4-6: (medium) Use to maintain slow boil for large amounts of liquids and for most frying operations.

2-4: (medium low) Use to continue cooking covered foods or steam foods.Lo: (low) Use to keep foods warm and melt chocolate and butter.

HILO

OFF

SETTING THE

CONTROLS

1.Place pan on surface element.2.Push in and turn the knob in either direction to the desired heat setting.3.After cooking, turn knob to OFF. Remove pan.

HOT SURFACE

INDICATOR LIGHTS

Each element has a hot surface indicator light. A light will be illuminated when the matching cooking area is hot. It will remain on, even after the control is turned off, until the area has cooled. The lights are located near the control knobs.