JIgniters I
•Itisimportanttokeepigniterportopeningsonburnersclearandfreeofobstructions to avoid ignitionfailure and possiblegas buildup. If the port openingsare blocked, use a toothpickto remove food particles.
•The igniter cap and stem can be cleaned with warm soapy water and a plastic scrubber. The wire electrode inside the cap can be cleaned with a small brush. Rinse and dry.
This area is located under the grill and surface burners and should be cleaned after each use of the grill.
•To remove light soil, clean with soapy water or with cleaners such as Fantastic or 409. For easier cleanup, a) spray with household cleaner; b) cover with paper towels; c) add small amount of water to keep the paper towel moist; d) cover and wait 15 minutes; e) wipe clean.
•To remove moderate soil, scrub with Comet, BonAmi, a soft scrub cleanser or plastic scrubber.
•To remove stubborn soil, spray with an oven cleaner; let soak overnight; wipe clean; rinse and dry.
Drain Jar
A drain jar is located below the grillbasin pan under the countertop. Check periodically to prevent spillovers. Unscrew and remove. If jar is broken, replace with any heat tempered
jar, such as a canning jar, which has a stan- dard screw neck.
Serial Plate
DO NOT CLEAN.
18
