Jenn-Air DW760, DW860, DW710, DW700, DW730 manual Press the Cancel buttonto cancel this option

AccuTempTM - Models DW760 & DW860 Only If, for any reason, the incomingwater is below 120°F, press the AccuTempTM buttonto insure the water is heatedto the propertemperaturefor best cleaningand drying results. If the water temperature is low, the main wash will be extended and the Heating Delay indicator light will glow.

On - The On lightwill glow during all washes, rinsesand the dryingperiod.

Heating Delay -TheHeatingDelay lightindicates the mainwashis beingextendedto heatthe water to the propertemperature.

Press the Cancel buttonto cancel this option.

This option is not available in the Rinse & Hold cycle,

Heat Dry

Selectthisoptionto provideheat forfasterdrying.

Fan Dry - Models DW710 & DW730 Only

Depressthisbuttontoturnthe heatingelementoff duringthe fan dry cycle.

Cancel - Models DW760 & DW860 Only

Press the Cancel buttonto cancel the Heat Dry AND/OR theAccuTempTM options.NOTE: If heat dry has been cancelled, a fan will still operate duringthe dry cycle.

Delay Start - Model DW860 Only

Select thisoptionto delaystartthe dishwasherfor approximately1 - 6 hours.To select,turnthe Set Dialto the desirednumberof hours.

Note: Run the water from the hot water tap to clear the line of cold water before starting the dishwasher.

After loading, press the button for the desired wash cycle (Heavy, Normalor Light). Pressthe

buttonforthedesiredoptions.Setthe dialtoStart. Note DWT00 Owners: Turn the dial to desired

setting.

To selectRinse & Hold set the dial at the begin- ningofthe Rinse&Holdsection.AccuTempTM and Heat Dry are notavailablewiththiscycle.

After selectingthe cycle and options press the dooruntilit latches.The motorwillrunfora minute

ortwobeforethe dishwasherbeginsto fill.The On indicatorwill light.

Clean (Models DW760 & DW860 only) - The Clean light will glow after the drying period is

completed as a reminderthat the dishes have gonethrougha washand dry cycle. It will remain lit until the dial is manually turned to the Off position (vertical line after the dry section).

Delay Start (Model DW860 only) - The Delay Start lightwillglowduringthe Delaytime period. It willgo off whenthe dishwasherstarts.

For best cleaning,the forgotten item shouldbe added early in the cycle.

1.Unlatchthe doorand wait untilthe soundof circulatingwater stops.

2.Open the door and add the item.

3.Closethe doorand pause brieflybefore latch- ing the door. The cycle will continue at the pointit was interrupted.

9