4.Slide the compression nut over the sleeve and screw into the water valve inlet port.

 

A

 

B

 

C

 

D

A. Plastic water tubing

C. Compression nut

B. Sleeve

D. Copper tubing

5.Using an adjustable wrench, hold the nut on the plastic water line to keep it from moving. Then, with a second wrench turn the compression nut on the copper tubing counterclockwise to completely tighten. Do not overtighten.

A

B

C

D

E

A. “P” clamp

D. Compression nut

B. Plastic water line

E. Copper tubing

C. Water valve inlet port

 

6.Check connection by pulling on copper tubing. Attach the plastic water line to the refrigerator cabinet with a “P” clamp. Turn on water supply to refrigerator and check for leaks. Correct any leaks.

Complete the Installation

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill the ice container.

Refrigerator Door(s) and Drawer

TOOLS NEEDED: ⁵⁄₁₆", ³⁄₈", ¹⁄₄" hex head socket wrench, a #2 Phillips screwdriver, and a flat-blade screwdriver.

IMPORTANT:

Your refrigerator may have a standard reversible refrigerator door (Style 1) with either a freezer door or freezer drawer, or French doors (Style 2). Follow the instructions specific to the door style of your model.

All graphics referenced in the following instructions are included later in this section after “Final Steps.” The graphics shown for the standard door (Style 1) are for a right-hand swing refrigerator (hinges factory installed on the right).

If you only want to remove and replace the doors, see “Remove Door(s) and Hinges” and “Replace Door(s) and Hinges.”

Before you begin, turn the refrigerator control OFF, and remove food and adjustable door or utility bins from the doors.

Remove and Replace Refrigerator Door Handles

Style 1–Standard Door

Front Mount Handle

To remove the handle, remove the screw attaching the trim to the upper end of the handle. Using a flat-blade screwdriver wrapped in masking tape, pry the trim piece from the lower end of the handle. Then, remove the screws attaching the handle to the door. See Front Mount graphic 2.

To replace handle, reverse directions.

Side Mount Handle

To remove the handle, remove the four screws attaching the handle to the side of the door. See Side Mount graphic 2.

To replace the handle, align the holes in the handle with the holes in the door. Then, insert a screw into the upper hole at each end of the handle. Next, insert a screw into the lower holes. Tighten the screws. See Side Mount graphic 2.

Style 2–French Doors

Metal Handles

Using a ³⁄₃₂" or ¹⁄₈" Allen wrench, loosen the two setscrews located on the side of each handle. Pull the handle straight out from the door. Make sure you keep the screws for reattaching the handles. See Metal Handle graphic 1.

To replace the handles, reverse the directions.

Plastic Handles

To remove the handle, grasp the lower part of the handle firmly, slide the handle up and pull the handle straight out from the door. See Plastic Handle graphic 1.

To replace the handle, position the handle so that the large holes in the mounting clips are down and align the holes with the door studs. Rotate the handle so that the mounting clips are flat against the door and slide the handle down to engage. See Plastic Handle graphic 1.

Remove Door and Hinges

Style 1–Standard Door

⁵⁄₁₆" Hex-Head Top Hinge Screw

5

Page 5
Image 5
Jenn-Air JFC2089WEM Refrigerator Doors and Drawer, Complete the Installation, Style 2-French Doors

JFC2089WEM specifications

The Jenn-Air JFC2089WEM is a sophisticated refrigerator that combines elegance with advanced technology for a seamless kitchen experience. This model is part of Jenn-Air's premium line of appliances, designed for consumers who appreciate both style and function.

One of the standout features of the JFC2089WEM is its dual-temperature design. This refrigerator utilizes a dual evaporator system to maintain optimal humidity levels for both the refrigerator and freezer compartments. The result is fresher food for longer periods, reducing spoilage and maintaining the quality of your groceries.

The refrigerator boasts an impressive capacity of 20 cubic feet, which provides ample storage space for families of all sizes. Its innovative organization system includes adjustable shelves and humidity-controlled crisper drawers, allowing users to configure the interior in a way that best suits their needs. The crisper drawers are especially beneficial for fruits and vegetables, as they help retain moisture and flavor, keeping produce crisp and fresh.

Another highlight of the JFC2089WEM is the advanced filtration system. This includes a water filtration system that ensures ice and water dispensed are free from impurities, providing not only great tasting water but also peace of mind regarding water quality. Additionally, the refrigerator features an external ice and water dispenser, making it quick and convenient to enjoy chilled beverages without the need to open the refrigerator door.

The Jenn-Air JFC2089WEM also integrates smart technologies for enhanced user experience. With Wi-Fi connectivity, users can monitor and control the appliance remotely through a smartphone app. This feature allows for adjustments to temperature settings, alerts for door open situations, and more, ensuring an efficient and manageable kitchen environment.

In terms of design, the JFC2089WEM is available in a sleek stainless-steel finish, which not only adds a modern touch but is also fingerprint-resistant, keeping the surface clean and smudge-free. The integrated design allows it to blend seamlessly into any kitchen decor.

Energy efficiency is another attribute of the Jenn-Air JFC2089WEM, as it is ENERGY STAR certified. This certification signifies that the refrigerator meets strict energy efficiency guidelines, helping to reduce energy costs while being environmentally friendly.

Overall, the Jenn-Air JFC2089WEM stands out as a top choice for those looking for a combination of style, technology, and functionality in their kitchen appliances. Its array of features and modern conveniences makes it a worthy investment for a contemporary home.